Best choice
Bosch 50-Pieces X-Line Titanium Drill and Screwdriver Bit Set (for Wood, Masonry and Metal, Accessories Drills)
Suitable for all handheld and stationary drills with a practical Bosch X-Line case for the clear layout of the contents
£ 30.34 free delivery
48% discount
Milwaukee Shockwave Metal Drill Bit HSS-G Red Hex Titanium 1/4 Inch 4.5 x 76 mm
Drill bit with drive teeth for finer machining and low heat generation.
£ 4.59
33% discount
10-Piece Masonry Drill Bits Kit for Concrete, Stone, Carbide Drill Bit Set for Glass, Brick, Tile, Plastic, Ceramic and Wood Size 4 to 12 mm
Efficient- These bits deliver faster starts and less walking in concrete, brick and block; Wide Flute Design providing fast dust remove ability and reducing heat
£ 24.00
Silverline 819716 Metric HSS-R Jobber Bits 10pk 4.5 mm
HSS-R roll forged 4341 high speed steel
free delivery
Recommendation
DEWALT DT71563-QZ Combination Drill Bit Set - 100 Pieces - Black Durable Case Included
SUITABLE FOR MULTIPLE MATERIALS Masonry, Plastic, Metal & Wood
free delivery
STROTON Metric M42 8% Cobalt Drill Bits for Stainless Steel and Hard Metal (4.5mm x 5pcs)
This Cobalt Drill Bit is Typically Capable of Running Three to Five Times Faster.Despite the Higher Price,the Cost Per Hole When Using Cobalt Drill Bit Will be the Lowest,Since It Can Produce So Many More Holes.
Meccion HSS Cobalt Jobber Drill Bit 10pcs 4.5mm Twist Drill Bit for Drilling Stainless Steel and Metal
Worked on Most Material - M35 HSS twist drill bit for the professional machining of metals, stainless steel, cast iron, alloy steel, hard plastics, wood.
Rennie Tools - 10pc 4.5mm HSS Gold Cobalt Jobber Drill Bit Set for Stainless Steel, Hard Metals, Aluminium, Cast Iron, Copper
For drilling particularly tough or hard metal drilling applications such as stainless steel, hardened metal, cast iron, Cr-Ni and special acid resistant steels. Also work very well on standard metals steels, RSG, aluminium, high temperature alloy, titanium alloy, non ferrous metals, plastics and wood.
Hi-Spec 99pc Complete HSS Mixed Drill Bit Set. 1 to 10mm Titanium Coated High Speed Steel Drill Bits for Metal, Wood & Plastic. All In a Box Case
LONG-LIFE TITANIUM COATING Their golden vapour-deposited Titanium Nitride coating increases surface hardness and lubrication properties. Get improved wear resistance and sharpness with reduced friction and sticking
free delivery
10% discount
PATIKIL 4.5mm Drill Bit, M42 8% Cobalt High-Speed Steel Jobber Straight Shank 135° Titanium Nitride (TiN) Coated for Hard Metal Stainless Steel - 2 Pack
PACKING LIST 2 packs of drill bits in 4.5mm(0.18 inch 3 16 inch) cutting diameter, 38mm 1.5 inch flute length, 80mm 3.15 inch overall length, 135-degree split point
£ 7.79
Gunpla Cobalt Drill Bits 4.5mm 10-Pieces, M35 HSS Metric Straight Shank Jobber Drill Bit Set with Plastic Case for Hardened Stainless Steel, Metal, Aluminium, Tile, Wood, Plastic and Cast Iron…
WIDE APPLICATION M35 Cobalt HSS drill bits are purposely forged to work on hardened materials. Mainly used in cutting through hard metals such as steel, stainless steel, cast iron, high temperature alloy, titanium alloy, hard plastics and woods, and also can be used for softer materials
£ 9.87
POWORE Cobalt Drill Bits 4.5mm Box of 10, M35 HSS Metric Round Shank Twist DIN338 with Case for Hardened Stainless Steel, Metal, Aluminium, Tile, Wood, & Cast Iron, Drill Driver Accessories
Fully Ground - This precision grinding process ensures that all of our drill bits have an impeccable cutting edge, making them exceptionally effective even at high temperatures.
HPMAISON True 5% Cobalt Jobber Drill Bit Set, 10Pcs 4.5mm M35 High Speed Steel Twist Drill Bits, 135° Split Point Extremely Heat Resistant for Stainless Steel, Cast Iron, Hard Metal, Plastic, Wood
Professional & Widely Use M35 HSS Cobalt 5% Jobber Drill Bits for Drilling Stainless Steel & Hard Steels. Also can be used for drilling metals and other materials, such as cast iron, copper, high temperature alloy, titanium alloy, aluminum, hard plastics and woods, etc.
Draper 38805 Expert HSS Drill Bit, 4.5mm Ø, Pack of 10 , Blue
Easy to Use
free delivery
Draper Expert 4.5mm HSS Titanium Drill Bit | Metric-sized Tools | Manual & Electric Tip Drills | Heavy Duty Bits | 38832
Durable Manufactured from Titanium making it exceptionally long-lasting and strong regardless of the type of task you have ahead of you.
free delivery
SALI Cobalt Drill Bit Set 10Pcs 4.5mm M35 High Speed Steel Jobber Drill Bit Kit (HSS) Twist Drill Bits for Hardened Metal, Stainless Steel, Cast Iron, Wood and Plastic, with Index Storage Case
Package 10Pcs 4.5mm, SALI drill bit set has connectable accessory storage system to optimize storage space
20% discount
99 Pcs Titanium Coated Twist Drill Bit Set, 4241 HSS 135° Tip Metric Drill Bits Size from 1.5-10mm for Metalworking, Woodworking, Plastic Hole Drilling
Twist Design Precise 135o Split Point drill bit ensures clean & accurate hole drilling.
£ 14.99
9% discount
sourcing map 2pcs Brad Point Drill Bits 4.5mm(11/64") Dia Straight Steel Round Shank Drill Metric Brad Point 1.8" Drilling Depth Spiral Twist Drill Bits for Carpenter Woodworking Plastic Rubber
Size - The brad point drill bits have an overall length of 80mm 3.1", with a diameter of 4.5mm 0.2" and a straight shank diameter of 4.5mm 0.2". The maximum cutting depth can be up to 45mm 1.8".
£ 4.69
MASO H12342 Jobber Twist Drills 10 x 4.5mm Ground HSS Drill Bits Metric High Speed Steel Jobber Twist Drills Ideal for Processing of Iron, Wood, Aluminum, etc.
HSS-R roll forged 4341 high speed steel
Misuyue 8% Cobalt Drill Bits, Metal Drill Bit Set 4.5mm, HSS M42 Carbide Twist Drill Bit for Metal Stainless Hard Steel Aluminum, Wood Drill Bits (4pcs)
Professional Drill Bit Precise 135 self-centring tips, twist drill bit kit will not "walk" or "wander", clear chips and particles faster. Produced by precision fully ground which ensures chips move smoothly. Conforms to DIN 338.
Alpen 18300450100 HSS-ECO Forte Jobber Drills, Grey, 4.5 mm
Faster by special drill geometry
free delivery
TA-VIGOR 6Pcs 4.5mm Extra Long Twist Drill Bits, 200mm Length High-Speed Steel HSS Straight Shank Spiral Drill Bits for Wood Metal Aluminum Plastic
Size & Package Twist Drill Bits diameter 4.5mm 0.18"; Drill Bit Length 130mm 5.12"; Shank Diameter 4.5mm 0.18"; Total Length 200mm 7.87"; Package includes 6 x Straight Shank Twist Drill Bit.
£ 11.29
METALLIXITY Drill Bit (4.5mm) 5Pcs, 4341 High-Speed Steel Straight Shank 118° Black and Gold Finish for Copper Aluminum Wood Plastic Medium Hard Metal
1 APPLY TO - The drill bit is suitable for daily equipment maintenance and repair, low-intensity applications, and medium to low-hardness metals, including common stainless steel, steel, aluminum alloy, and copper. It is also effective for drilling wood and plastic materials, making it an excellent choice for various DIY projects around the home.
DEWALT DT71563-QZ Combination Drill Bit Set - 100 Pieces - Black Durable Case Included
SUITABLE FOR MULTIPLE MATERIALS Masonry, Plastic, Metal & Wood
free delivery
Hilpaty HSS-TiN Drill Bit 4.5mm x 80mm x 10pcs Titanium Coated Twist Drill Bits for Metal, Stainless Steel, Non Ferrous, Cast Iron, Wood
Professional Drill Bits - Made of M35 high speed steel with titanium nitride coated, 135 self-centring tips, according to DIN 338 & BS328 Standard.
10 Pcs 4.5mm Drill Bit, M35 HSS Cobalt Drill Bits, HSS-CO Drill Bits Set, Twist Drill Bits, 4.5mm for Drilling on Stainless Steel
High Quality with high surface finish, high grinding precision , the blade is sharp and durable in use.
38% discount
Bosch Accessories Professional 10-Piece PointTeQ HSS Twist Drill Bit (for Metal, 4.5 x 47 x 80 mm, Drill Driver Accessories)
High durability The increased speed of the drill bit means less heat is built up, reducing wear
£ 12.96
7% discount
Sealey - 3pc 50mm Slotted 4.5mm Impact Power Tool Bit Set - AK8226
MAXIMUM TORQUE - Torsion bits absorb impact and transfer maximum torque to the fixing.
£ 4.98
100 x TopsTools TT100TW 1mm - 10mm Mix Size Titanium Coated HSS Twist Drill Bits Storage Box Set For Wood Plastic Copper Brass Compatible with Bosch Dewalt Makita Milwaukee and Many Others
Perfect for drilling into a variety of wood, plastics and low tensile metals such as mild steel, copper, brass
JVJ 9-Piece 4–10 mm HSS Cobalt Drills, 200 mm Length, Spiral Drill Bit for Drilling
9 sizes in 1
Faithfull Long Series 4.5mm Pre-Pack HSS Jobber Drills (2 Pieces)
Suitable for use with power drills
CoCud Solid Carbide Drill Bit, 4.5mm Diameter, AlTiSin Coated K45/P10 Tungsten Carbide Twist Drill Bits - (Applications: for Hardened Steel Stainless Steel Alloy), 1-Piece
K45 P10 Tungsten Carbide --- It is a micro grain tungsten-cobalt alloy with higher hardness, better wear resistance, higher strength, better bending resistance and heat resistance. Provides faster cutting speeds and is harder but more brittle.
ZERINT CB-M03H 3pcs Tyre Drill Bits High-speed Steel Tyre Repair Drill Bits Tyre Repair Cutter Automobile Car Tool(3mm, 4.5mm, 6mm)
Suitable for tyre repair work on cars, trucks, motorbikes, and tractors
Makita D-72855 HSS TIN Drill Bit Eco Set 13 Piece
1.5, 2, 2.5, 3, 3.2, 3.5, 4, 4.5, 4.8, 5, 5.5, 6 and 6.5mm bits
free delivery
CEEYSEE 10Pcs Drill Bits 4.5mm HSS Drill Bit Straight Shank Twist Drill Bits Titanium Jobber Drill Bit Sets for Stainless Steel,Aluminum, Plastic and Wood (4.5mm/MHZT)
Packaging - 10 Pcs.
115mm Hole Saw Drill Bit for Wood and Metal, 4.5 inch Circular Hole Cutter for Cast Iron, Aluminum, Plywood, Acrylic, PVC/UPVC
Advanced Material These hole saw in matt black and frosted orange are created with high quality cobalt high speed steel with a high hardness(69HRC) and compressive strength, compared with high carbon, high chromium die steel, it has better toughness and wear resistance, strong and sturdy for long-term use.
TOP-VIGOR 10Pcs 4.5mm Cobalt Jobber Drill Bits, M35 High Speed Steel HSS Twist Dril Bit Tool with Straight Shank for Drilling Hardened Metal, Stainless Steel, Cast Iron, Wood and Plastic
Package It includes 10Pcs 4.5mm 0.18" Cobalt Drill Bits. This drill bit fits the majority of power drill currently on the market and DIY, household maintenance and repair
kwb Extra Long HSS Metal Drill Bit Ø 4.5 mm for Efficient Drilling in Steel and Metals
SELF-CENTERING 135 point angle and cross-cutting edge eliminate the need for center punching or pre-drilling.
Saim Extra Long Twist Drill Bits,4Pcs HSS(High Speed Steel) Drill Bits 4.5mm Diameter 160mm Length for Hardened Metal Woodwork Plastic aluminum alloy
Specifications Twist Drill Bits Shank Diameter 0.19-inch; Drill Bit Length 4.33-inch; Total Length 6.3-inch; 4 x Straight Shank Twist Drill Bit
amoolo Cobalt Drill Bit Set (1.5-6.5mm,13Pcs), M35 HSS Metric Twist Drill Bit Set for Hard Metal, Stainless Steel, Cast Iron
M35 Cobalt Drill Bit This drill bit contains 5% Cobalt (M35 Cobalt HSS), which increases the strength, extend the tool life and makes it more heat-resistant. Rockwell Hardness 67.
3PCS Step Drill Bit Set High Speed Steel Titanium Coated Cone Drill Bits Hole Cutter Power Tools for DIY Plastic Wood Metal
High Quality The step drill bit set is made of high speed steel and with the Titanium coated to reduce friction and heat,has strong durability.which is smoother and has no resistance than straight-grooved step drill bit and chip removal is faster.
CESFONJER 10pcs HSS High Speed Steel Twist Drill Bits Set, Cobalt Drill Bit, Metal Drill, 3-5mm (2 Each), Universal Drill Bit for Iron, Steel, Aluminum, Wood, Plastic
Smooth surface to reduce friction, sharp blade for fast drilling hole.
Generic 1-10MM 10 PCS MICRO HSS PRO TITANIUM COATED COBALT JOBBER STAINLESS STEEL DRILL BITS SET METAL WOOD PLASTIC UK (4.5mm)
Made in the UK Manufactured with precision in the UK, ensuring superior quality and craftsmanship.
Sealey AK8201 3pc 25mm Slotted 4.5mm Impact Power Tool Bits
Forged from high quality S2 steel.
free delivery
4.5mm Extra Long Drill Bit, 200mm High Speed Steel Drill Bit HSS Drill Bit Auger Bit Assortment for Metal Woodwork Plastic
Easy to Use This drill bit has a straight shank, which is more convenient to operate. Milled flutes with deep cut spiral that delivers fast material removal.
Bluespot 20268 10pce 4.5mm HSS Drill Set
Ground Flute for increased accuracy when drilling
free delivery
VonHaus HSS Metal Drill Bit Set with Carry Case Organiser - 99 Pcs 1.5-10 mm High Speed Steel Bits Titanium Coated Steel - For Drilling Wood, Masonry and Metal - Accessories Drills and Screwdrivers
ALL YOU NEED Complete with 99 pieces including 14 sizes ranging from 1.5mm to 10mm, your VonHaus drill bit set caters for all your DIY drilling application needs, so that you can get the job done.
free delivery
10 x 4.5mm Ground HSS Drill Bits Metric High Speed Steel Jobber Twist Drills
All Trade Direct
free delivery
8% discount
Silverline 819716 Metric HSS-R Jobber Bits 10pk 4.5 mm
HSS-R roll forged 4341 high speed steel
£ 5.16 free delivery
Dewalt dt4905-qz – Cobalt Drill Bit HSS-Co Extreme For Metal 4.5 mm
The brand in which professionals trust
free delivery
Eurobit 0702 HSS Wood Drill Bit 4.5 x 80 mm
Pilot drill
UK Drills 4.5mm HSS Jobber Wood 10 Drill Bits High Speed Steel 1mm to 9.5mm
High quality drill bits are ideal for steel, plastic, wood and similar materials
free delivery
RDGTOOLS Long Series HSS (2 X Drills) Metric Drill BIT 4.5MM
RDGTOOLS
free delivery
Sealey - 3pc 50mm Slotted 4.5mm Impact Power Tool Bit Set - AK8226
MAXIMUM TORQUE - Torsion bits absorb impact and transfer maximum torque to the fixing.
free delivery
4.5mm drill bits + M35 Cobalt Drill Bit Set HSS-CO Drills Set 1.0-5.0MM rilling on Stainless Steel (4.5mm)
Professional tools Suitable for stainless steel, cast iron, sheet metal, steel, angle iron drilling is widely used in stainless steel, automotive spring steel and die steel drilling has a high finish, high grinding precision, blade sharp and
free delivery
PATIKIL 4.5mm Drill Bit, Jobber Straight Shank M35 Cobalt 5% High-Speed Steel 135° Gold Finish for Stainless Steel Hard Metal - 5 Pack
INSTRUCTION When machining different materials, the spindle speed and feed rate vary. Generally, the harder the material, the lower the spindle speed and feed rate should be. For specific speed and feed rate recommend for common materials, please refer to the details provided on the product page.
sourcing map HSS(High Speed Steel) Extra Long Twist Drill Bits, 4.5mm Drill Diameter 160mm Length for Hardened Metal Woodwork Plastic Aluminum Alloy 2 Pcs
Strength and Hardness - Made of high-speed steel. HSS(High Speed Steel) enables the drill body harder and can keep a longer drilling life.
Draper 2pcs HSS Titanium Nitride Coated Drill Bit, 4.5mm x 80mm - 08866 - for Steel, Non-Ferrous Metals, Wood and Hard Plastic
Compatible with a standard 10 13mm chuck
Milwaukee HSS-G THUNDERWEB Metal Drill Bit 4.5mm OL:80mm WL:47mm
HSS-G THUNDERWEB Metal Drill Bit 4.5mm (1)
4.5mm Metric M35 Cobalt Steel Extremely Heat Resistant Twist Drill Bit of 2pcs with Straight Shank to Cut Through Hard Metals Such as Stainless Steel and Cast Iron, 5% Cobalt M35 Grade HSS-CO
Cobalt Steel - Manufactured From M35 5% Cobalt Steel, With Molybdenum And Cobalt Added To Creates A Hardened Alloy, Measuring Rockwell Hardness Up To 65, For Much Faster Cutting And Extra Longer Life Span, With Up To 10 Times When Compared with an Average HSS Drill Bit.
Box of 10 x 4.5mm HSS M2 Fully Ground Jobber Drill Bit Tin Titanium Nitride Coated DIN338 Standard (4.5mm x 80mm)
Manufactured To DIN338 Standard From M2 Grade HSS Material
Makita B-53811 Drill & Screwdriver Bit Accessory Set (100 Piece), Multi-Colour, Set of 100
- 1 x hole saw adapter
free delivery
TA-VIGOR 4Pcs 4.5mm Extra Long Twist Drill Bits, 160mm Length High-Speed Steel HSS Straight Shank Spiral Drill Bits for Wood Metal Aluminum Plastic
Size & Package Twist Drill Bits diameter 4.5mm 0.18"; Drill Bit Length 100mm 3.94"; Shank Diameter 4.5mm 0.18"; Total Length 160mm 6.3"; Package includes 4 x Straight Shank Twist Drill Bit.
Milwaukee Shockwave Metal Drill Bit HSS-G Red Hex Titanium 1/4 Inch 4.5 x 76 mm
Drill bit with drive teeth for finer machining and low heat generation.
HARFINGTON 2pcs Brad Point Drill Bits 4.5mm(11/64") Dia Straight Round Shank Drill Metric Brad Point 2.4" Drilling Depth Spiral Twist Drill Bits for Carpenter Woodworking Plastic Rubber
Size - The brad point drill bits have an overall length of 80mm 3", with a diameter of 4.5mm 0.2" and a straight shank diameter of 4.5mm 0.2". The maximum cutting depth can be up to 55mm 2.4".
METALLIXITY Drill Bit (4.5mm) 12Pcs, 4241 High-Speed Steel Straight Shank Nitriding Black 118° for Wood Plastic Iron Copper Aluminum Low Soft Metal
1 APPLY TO - The drill bit is suitable for daily equipment maintenance and repair, low-intensity applications, and medium to low-hardness metals, including aluminum alloy, and copper. It is also effective for drilling wood and plastic materials, making it an excellent choice for various DIY projects around the home.
Misuyue 6pcs Metal Drill Bits, 4.5mm HSS Drill Bit Sets, Carbide Twist Drill Bit for Metal Stainless Steel Aluminum Alloy, Wood Drill Bits
Professional Drill Bit Precise 135 self-centring tips, twist drill bit kit will not "walk" or "wander", clear chips and particles faster. Produced by precision fully ground which ensures chips move smoothly. Conforms to DIN 338.
Makita D-72855 HSS TIN Drill Bit Eco Set 13 Piece
1.5, 2, 2.5, 3, 3.2, 3.5, 4, 4.5, 4.8, 5, 5.5, 6 and 6.5mm bits
CoCud Extra Long High Speed Steel Twist Drill Bits, 4.5mm Diameter 250mm Length, Straight Twist Jobber Drill Bit - (Applications: for Metal Woodwork Plastic Aluminum), 2-Pieces
Straight Shank Twist Drill Bits Size --- Twist Drill Bits Diameter 4.5mm 0.18-inch; Drill Bit Length 180mm 7.09-inch; Shank Diameter 4.5mm 0.18-inch; Total Length 250mm 9.84-inch, Tool Flute Type Spiral, Cutting Direction Left Hand.
32% discount
Bosch Professional 2608585849 HSS-Co Metal Drill Bit (stainless steel, 4.5 x 47 x 80 mm, accessory drill driver) , Gold
As a leading manufacturer for power tools accessories, Bosch offers the ideal accessories for virtually all applications
£ 4.38
kwb Silver Star HSS Metal Drill Bit Ø 4.5mm for Efficient Drilling with Cordless Drills and Power Drills
QUICK AND EFFICIENT High-quality 4.5mm HSS metal drill bit with specialized tip for up to 40% faster drilling and 50% less pressure.
Sealey 3pc 75mm Slotted 4.5mm Impact Power Tool Bit Set - AK8251
Forged from high quality S2 steel.
free delivery
TOP-VIGOR 5Pcs 4.5mm HSS Hex Shank Twist Drill Bits, High Speed Steel Drill Bit Set 1/4 Inch Shank, Quick Change Drill Bits for Steel, Wood, Plastic, Aluminum
Specification Shank 1 4-inch Hex; Drill Diameter 4.5mm 0.18-inch; Total Length 96mm 3.78-inch; Drill Bit Length 55mm 2.17-inch; 5 x Twist Drill Bits.
free delivery
Dewalt DT9502QZ 4 x 110 mm Extreme 2 SDS Plus Drill Bit
New tip design ensures better bit penetration
UK Drills - HSS Titanium Drill Bits - Fully Ground, Titanium Coated Tool Bit Jobber - To be used on Steel, Wood & Plastic - 4.5mm
ABOUT US - We pride ourselves in providing the best quality drill bits for over 30+ years. From drilling wood & tiles to masonry, we're happy to be your professional choice!
free delivery
sourcing map HSS(High Speed Steel) Extra Long Twist Drill Bits, 4.5mm Drill Diameter 160mm Length 4 Pcs
Strength and Hardness - Made of high-speed steel. HSS(High Speed Steel) enables the drill body harder and can keep a longer drilling life.
£ 9.49
PATIKIL 4.5mm Drill Bit, Jobber Straight Shank M2 High-Speed Steel 118° Nitriding Black and Gold Finish for Stainless Steel Hard Metal - 12 Pack
INSTRUCTION When machining different materials, the spindle speed and feed rate vary. Generally, the harder the material, the lower the spindle speed and feed rate should be. For specific speed and feed rate recommend for common materials, please refer to the details provided on the product page.
Draper 38805 Expert HSS Drill Bit, 4.5mm Ø, Pack of 10 , Blue
Easy to Use
£ 7.82 free delivery
Dewalt DT5044QZ 4.5 x 80 mm Extreme 2 Metal Drill Bit
Gold Ferrous Oxide coating prevents overheating
TA-VIGOR 2Pcs 4.5mm Extra Long Twist Drill Bits, 300mm Length High-Speed Steel HSS Straight Shank Spiral Drill Bits for Wood Metal Aluminum Plastic
Size & Package Twist Drill Bits diameter 4.5mm 0.18"; Drill Bit Length 200mm 7.87"; Shank Diameter 4.5mm 0.18"; Total Length 300mm 11.81"; Package includes 2 x Straight Shank Twist Drill Bit.
Misuyue 12pcs Metal Drill Bits, 4.5mm HSS Drill Bit Sets, Carbide Twist Drill Bit for Metal Stainless Steel Aluminum Alloy, Wood Drill Bits
Professional Drill Bit Precise 135 self-centring tips, twist drill bit kit will not "walk" or "wander", clear chips and particles faster. Produced by precision fully ground which ensures chips move smoothly. Conforms to DIN 338.
CoCud Twist Drill Bit, 4.5 mm Cutting Diameter, 0.18" Shank 6.3" Length, High-Speed Steel Black Oxide Extended Straight Jobber Drill Bit Set (Application: Metal Wood Plastic), 2-Pieces
Drill Bit set Size --- 2Pcs 4.5mm 0.18-inch dia metric twist drill bit with 100mm 3.94-inch blade length, and total length is 160mm 6.3-inch.
Box Of 10 x 4.5mm HSS Jobber Drill Bits - Black Roll Forged HSS-R for Carbon + Alloy Steel, Plastics & Wood. DIN338 (4.5mm x 80mm)
For Drilling Carbon And Alloy Steel, Non-Ferrous Metal, Plastics & Wood - Use A Cooling Agent And Drill At Slow Speeds When Drilling Metals
Faithfull Long Series 4.5mm Pre-Pack HSS Jobber Drills (2 Pieces)
Suitable for use with power drills
9% discount
HPMAISON True 5% Cobalt Drill Bit Set, 13Pcs M35 High Speed Steel Twist Drill Bits 1.5mm-6.5mm, 135° Split Point Extremely Heat Resistant for Stainless Steel, Cast Iron, Hard Metal, Plastic, Wood
High Quality Material 5% Cobalt High Speed Steel M35 provide extended tool life compared to ordinary drill bits. Durable and strong for longer service using time.
£ 10.98
10pcs High Speed Steel HSS Twist Drill Bits 4mm /4.5mm/5.0mm/5.5mm Drilling Tool for Stainless Steel Iron Plate Wood Plastic Aluminum(5.0mm)
DURABLE TO USE - Hardened cutting edge effectively extends drill bits service life.Three-point positioning offers good precision, making drilling round holes easier.
free delivery
kwb HI-NOX HSS M2 Metal Drill Bit Ø 4.5 mm with Special Point Geometry for Efficient Stainless Steel Drilling with Cordless Drills and Drill Machines, Longer Battery Life
EFFICIENT STAINLESS STEEL DRILLING Special point geometry reduces pull-in effect, making it ideal for sheet metal drilling.
12% discount
Sealey AK8201 3pc 25mm Slotted 4.5mm Impact Power Tool Bits
Forged from high quality S2 steel.
£ 5.96 free delivery
Haosie 8PCS Wood Drill Bits, 200mm Extra Long, Twist, for Soft Metal, Aluminum, Wood, Plastics (4/4.2/4.5/5.5/5.2/6/8/10mm)
Extra Long Twist Drill Long wood drill bit is about 200mm in length. The extra long drill bit can drill very deep holes. Thus the drilling and chip removal process can be accelerated. It improves work efficiency and convenience.
27% discount
Bosch Professional 18pcs. HSS Twist Drill Bit PointTeQ (for Metal, in ToughBox, Ø 1-10 mm, Accessory Drill)
Self-centering tip prevents wandering, making quick and easy drilling starts possible
£ 16.46
TOP-VIGOR 4Pcs 4.5mm Dia Extra Long Twist Drill Bits, 160mm Length High Speed Steel Extended Spiral Drill Bit, Straight Shank Twist Drill Bit Tool for Wood Metal Aluminum Plastic
Specifications Twist Drill Bits diameter 4.5mm 0.18"; Drill Bit Length 100mm 3.94"; Shank Diameter 4.5mm 0.18"; Total Length 160mm 6.3"; Package includes 4 x Straight Shank Twist Drill Bit.
free delivery
sourcing map HSS(High Speed Steel) Extra Long Twist Drill Bits, 4.5mm Drill Diameter 160mm Length for Hardened Metal Woodwork Plastic Aluminum Alloy 6 Pcs
Strength and Hardness - Made of high-speed steel. HSS(High Speed Steel) enables the drill body harder and can keep a longer drilling life.
TA-VIGOR 2Pcs 4.5mm Extra Long Twist Drill Bits, 160mm Length High-Speed Steel HSS Straight Shank Spiral Drill Bits for Wood Metal Aluminum Plastic
Size & Package Twist Drill Bits diameter 4.5mm 0.18"; Drill Bit Length 100mm 3.94"; Shank Diameter 4.5mm 0.18"; Total Length 160mm 6.3"; Package includes 2 x Straight Shank Twist Drill Bit.
Bosch 5x PRO Metal HSS-G Twist Drill Bit Long Length (for Non-ferrous metals, Steel, Ø 4,50 mm, Professional Accessory Rotary Drill/Drivers)
For drilling in metal, eg when pre-drilling for anchors, rivets, and threads or drilling in steel beams for installations, and fixtures
free delivery
Misuyue 6pcs Metal Drill Bits, 4.5mm/0.177" HSS Carbide Jobber Drill Bit Sets, Twist Drill Bit for Metal Stainless Steel Aluminum Alloy, Wood Drill Bits
Professional Drill Bit Precise 135 self-centring tips, twist drill bit kit will not "walk" or "wander", clear chips and particles faster. Produced by precision fully ground which ensures chips move smoothly. Conforms to DIN 338.
DeWalt DT5545QZ 4.5 x 80mm Extreme 2 Metal Drill Bit (10 Pieces)
Fast drilling
free delivery
4.5mm HSS Gold Cobalt Jobber Drill Bit For Drilling Stainless Steel And Hard Steels/Metals. (4.5mm x 80mm Cobalt Jobber Drill)
High heat and wear resistance
free delivery
METALLIXITY Drill Bit (4.5mm) 10Pcs, 4241 High-Speed Steel Straight Shank Nitriding Black 118° for Wood Plastic Iron Copper Aluminum Low Soft Metal
1 APPLY TO - The drill bit is suitable for daily equipment maintenance and repair, low-intensity applications, and medium to low-hardness metals, including common steel, aluminum alloy, and copper. It is also effective for drilling wood and plastic materials, making it an excellent choice for various DIY projects around the home.
33% discount
Bosch Professional Impact Control HSS Twist Drill Bit (for metal, 4.5 x 47 x 87 mm, accessories for impact drills)
Extremely robust the production of solid metal results in an extremely robust body of the Impact Control HSS twist drill bit
£ 5.16
8pcs 200mm Extra Long Twist Drill Bits Straight Shank High-Speed Steel for Wood Plastic and Aluminum
MATERIAL twist drills are made of HSS high speed steel for high hardness and durability, Suitable for many electric drills and drills
sourcing map 12pcs Jobber Drill Bits 4.5mm (0.177") Black Nitride & Gold Titanium Coated M2 High Speed Steel (HSS) Twist Drill Bits for Stainless Steel Aluminum Alloy Metal
Twist Drill Bits Cutting edge diameter 4.5mm 0.177"; round shank diameter 4.5mm 0.177"; cutting edge length 50mm 1.97"; overall length 79mm 3.11"; split point 135 degree. Used with hand drills, drill presses, bench drills, machining centers, CNC lathes, etc.
TA-VIGOR 5Pcs 4.5mm Hex Shank Twist Drill Bit Set, 1/4 Inch Shank HSS High Speed Steel Drill Bit Set Quick Change Twist Drill Bits for Woodworking, Plastic and Metal
Specification Shank 1 4-inch Hex; Drill Diameter 4.5mm 0.18-inch; Total Length 96mm 3.78-inch; Drill Bit Length 55mm 2.17-inch; 5 x Twist Drill Bits.
PATIKIL 4.5mm Drill Bit, Jobber Straight Shank M2 High-Speed Steel 135° Titanium Nitride TiN Coated for Stainless Steel Hard Metal - 2 Pack
INSTRUCTION When machining different materials, the spindle speed and feed rate vary. Generally, the harder the material, the lower the spindle speed and feed rate should be. For specific speed and feed rate recommend for common materials, please refer to the details provided on the product page.
13Pack HSS Twist Drill Bit Set Metric M35 Cobalt Steel High Speed Steel Titanium Coated Drill Bit Tool Extremely Heat Resistant with Straight Shank 1.5mm-6.5mm for Drilling Tool Wood, Metal & Plastic
Extremely Heat Resistant twist drill bits Must be used and operated at 1500 RPM or greater for maximum efficiency. Straight shank allows for firmly holding and accurate centering, fit for standard drill chucks and regular round collet chucks
free delivery
Misuyue 8% Cobalt Drill Bits, Metal Drill Bit Set 1.5mm, 6pcs HSS M42 Carbide Twist Drill Bit for Metal Stainless Hard Steel Aluminum, Wood Drill Bits
Professional Drill Bit Precise 135 self-centring tips, twist drill bit kit will not "walk" or "wander", clear chips and particles faster. Produced by precision fully ground which ensures chips move smoothly. Conforms to DIN 338.
Draper 40824 Expert SDS Plus Masonry Drill, 4.5mm x 110mm
With milled flute
free delivery
Rennie Tools - Box of 10 x 4.5mm Hex Shank HSS Gold Cobalt Jobber Drill Bit Set For Stainless Steel, Hard Metals, Aluminium, Cast Iron, Copper. Twist Drill Bit Sets. 4.5mm Drill Bits Metric Drill Set
Our hex shank drill bits are great for drilling particularly tough or hard metal drilling applications such as stainless steel, hardened metal, cast iron, Cr-Ni and special acid resistant steels. This hex shank drill bit set will also work very well on standard metals steels, RSG, aluminium, high temperature alloy, titanium alloy, non ferrous metals, plastics and wood.
free delivery
PATIKIL 4.5mm Drill Bit, Jobber Straight Shank M2 High-Speed Steel 118° Nitriding Black and Gold Finish for Stainless Steel Hard Metal - 6 Pack
INSTRUCTION When machining different materials, the spindle speed and feed rate vary. Generally, the harder the material, the lower the spindle speed and feed rate should be. For specific speed and feed rate recommend for common materials, please refer to the details provided on the product page.
Dewalt DT9502QZ 4 x 110 mm Extreme 2 SDS Plus Drill Bit
New tip design ensures better bit penetration
free delivery
CoCud Twist Drill Bits, 4.5mm Drilling Diameter, Black Oxide High Speed Steel Extra Long Straight Shank - (Applications: for Stainless Steel Alloy Metal), 2-Pieces
Wide Applications --- Suitable for drilling stainless steel, aluminum alloy, iron, copper, brass, hard wood, hard plastic, and other metal materials in maintenance departments, machine shops, and other industries. Use on drill presses and bench drills.
free delivery
Bosch Professional 1x Metal drill bits HSS-G DIN 338 (for metal, Ø 4.5 x 47 x 80 mm, Accessory Drill Driver)
As a leading manufacturer for power tools accessories, Bosch offers the ideal accessories for virtually all applications.
sourcing map 6pcs Jobber Drill Bits 4.5mm (0.177") Black Nitride & Gold Titanium Coated M2 High Speed Steel (HSS) Twist Drill Bits for Stainless Steel Aluminum Alloy Metal
Twist Drill Bits Cutting edge diameter 4.5mm 0.177"; round shank diameter 4.5mm 0.177"; cutting edge length 50mm 1.97"; overall length 80mm 3.15"; split point 135 degree. Used with hand drills, drill presses, bench drills, machining centers, CNC lathes, etc.
CoCud Extra Long High Speed Steel Twist Drill Bits, 4.5mm Diameter 300mm Length, Straight Twist Jobber Drill Bit - (Applications: for Metal Woodwork Plastic Aluminum), 2-Pieces
Straight Shank Twist Drill Bits Size --- Twist Drill Bits Diameter 4.5mm 0.18-inch; Drill Bit Length 205mm 8.07-inch; Shank Diameter 4.5mm 0.18-inch; Total Length 300mm 11.81-inch, Tool Flute Type Spiral, Cutting Direction Left Hand.
free delivery
DeWalt DT5545QZ 4.5 x 80mm Extreme 2 Metal Drill Bit (10 Pieces)
Fast drilling
TA-VIGOR 2Pcs 4.5mm Extra Long Twist Drill Bits, 250mm Length High-Speed Steel HSS Straight Shank Spiral Drill Bits for Wood Metal Aluminum Plastic
Size & Package Twist Drill Bits diameter 4.5mm 0.18"; Drill Bit Length 150mm 5.91"; Shank Diameter 4.5mm 0.18"; Total Length 250mm 9.84"; Package includes 2 x Straight Shank Twist Drill Bit.
Misuyue 8% Cobalt Drill Bits, Metal Drill Bit Set 4.5mm, HSS M42 Carbide Twist Drill Bit for Metal Stainless Hard Steel Aluminum, Wood Drill Bits (2pcs)
Professional Drill Bit Precise 135 self-centring tips, twist drill bit kit will not "walk" or "wander", clear chips and particles faster. Produced by precision fully ground which ensures chips move smoothly. Conforms to DIN 338.
4.5mm HSS Jobber Drill Bit - Black Roll Forged HSS-R For Carbon + Alloy Steel, Plastics & Wood. DIN338 (4.5mm x 80mm)
Made To DIN338 Standard
free delivery
Bosch 2607017319 Professional 32-Piece Screwdriver Bit Set (Extra Hard Screwdriver Bit, Drill Driver and Screwdriver Accessories) , Silver , 13cm x 6.7cm x 4.5cm
32-piece screwdriver bit set from Bosch - with a 1 4-inch hexagon shank, ideal for general screwdriving work with screwdrivers and drill drivers
free delivery
sourcing map 5pcs Brad Point Drill Bits 4.5mm(11/64") Dia Straight Round Shank Drill Metric Brad Point 2.2" Drilling Depth Spiral Twist Drill Bits for Carpenter Woodworking Plastic Rubber
Size - The brad point drill bits have an overall length of 80mm 3", with a diameter of 4.5mm 0.2" and a straight shank diameter of 4.5mm 0.2". The maximum cutting depth can be up to 55mm 2.2".
£ 5.19
10pcs M35 HSS Cobalt Drill Bits Set 4mm HSS-CO Twist Drill Bits for Drilling on Stainless Steel High-speed Steel Twist Drill for Drilling Applications in Stainless Steel, Cast Iron, Titanium
HIGH QUALITY with high finish, high grinding precision , the blade is sharp and in use
free delivery
4.5mm HSS M2 Fully Ground Jobber Drill Bit Tin Titanium Nitride Coated DIN338 Standard (4.5mm x 80mm)
Manufactured To DIN338 Standard From M2 Grade HSS Material
free delivery
Bosch Accessories 2608597657 CYL3 Concrete Drill Bit, 4.5 mm x 40 mm x 75 mm, Silver
EAN 3165140186698
sourcing map HSS(High Speed Steel) Extra Long Twist Drill Bits, 4.5mm Drill Diameter 200mm Length 2 Pcs
Strength and Hardness - Made of high-speed steel. HSS(High Speed Steel) enables the drill body harder and can keep a longer drilling life.
Draper Expert 4.5mm HSS Titanium Drill Bit | Metric-sized Tools | Manual & Electric Tip Drills | Heavy Duty Bits | 38832
Durable Manufactured from Titanium making it exceptionally long-lasting and strong regardless of the type of task you have ahead of you.
free delivery
10pcs High Speed Steel HSS Twist Drill Bits 4mm /4.5mm/5.0mm/5.5mm Drilling Tool for Stainless Steel Iron Plate Wood Plastic Aluminum(4.0mm)
TO USE - Hardened cutting edge effectively extends drill bits service life.Three-point positioning offers good precision, making drilling round holes easier.
13Pack HSS Twist Drill Bit Set Metric M35 Cobalt Steel High Speed Steel Titanium Coated Drill Bit Tool Extremely Heat Resistant with Straight Shank 1.5mm-6.5mm for Drilling Tool Wood, Metal & Plastic
Extremely Heat Resistant twist drill bits Must be used and operated at 1500 RPM or greater for maximum efficiency. Straight shank allows for firmly holding and accurate centering, fit for standard drill chucks and regular round collet chucks
£ 9.99
sourcing map 10pcs Jobber Drill Bits 4.5mm (11/64") Nitride Coated High Speed Steel (HSS) 4241 Twist Drill Bits for Stainless Steel Copper Aluminum Alloy Metal Wood Plastic, Black
Size - Cutting edge diameter 4.5mm 11 64"; round shank diameter 4.5mm 11 64"; cutting edge length 54mm 2.13"; overall length 82mm 3.23"; split point 135 degree (Fast cutting point penetrates quickly with less pressure and prevents walking on metal surfaces.)
Bosch Professional PointTeQ Hex Drill Bit (for Metal, Ø: 4.5 mm, Total Length: 87 mm, ¼’’ Hex Shank, Accessory for Impact Drivers and Drill Drivers)
Fast & Easy Start Get drilling quickly and efficiently without the need to pre-punch or pilot drill thanks to the self-centering PointTeQ tip
Draper Tools HSS Drill Bit, 4.5 mm (Pack of 10)
Suitable for use with metal, wood, chipboard and plastic
free delivery
sourcing map 2pcs 1/4" Hex Shank Drill Bits 4.5mm Titanium Drill Bits Set M35 High Speed Steel Twist Drill Bit 99mm Long Fully Ground for Wood, Stainless Steel, Metal, Plastic Plastic
Size - Drill Diameter 4.5mm 0.18-inch, Drill Bit Length 41mm 1.61-inch, Shank Size 1 4 Inch(6mm) Hex, Total Length 99mm 3.9-inch
Bosch 5x PRO Metal HSS-G Twist Drill Bit Long Length (for Non-ferrous metals, Steel, Ø 4,50 mm, Professional Accessory Rotary Drill/Drivers)
For drilling in metal, eg when pre-drilling for anchors, rivets, and threads or drilling in steel beams for installations, and fixtures
£ 13.89
BLOSTM HSS Drill Bit Set - 99 Piece Drill Bit Sets Metric Sizes from 1 to 10mm Titanium Coated High Speed Drill Bits for Metal, Wood, Plastic in Labelled Drill Bit Case - Multi Purpose Drill Bits
ALL-IN-ONE SOLUTION - This BLOSTM 99 Piece HSS Drill Bit Set is your ultimate companion for any drilling task, offering compatibility with wood, masonry, and metal surfaces. The metal drill bits ensure precise and clean drilling, while the titanium coating adds durability and reduces friction, enhancing performance across a range of materials.
£ 21.99 free delivery
sourcing map 3pcs Brad Point Drill Bits 4.5mm(5/32") Dia Straight Round Shank Drill Metric Brad Point 2.09" Drilling Depth Spiral Twist Drill Bits for Carpenter Woodworking Plastic Rubber
Size - The brad point drill bits have an overall length of 80mm 3.15", with a diameter of 4.5mm(3 8") and a straight shank diameter of 4.5mm(3 8"). The maximum cutting depth can be up to 3mm 1.69".
Bosch Professional Impact Control HSS Twist Drill Bit (for metal, 4.5 x 47 x 87 mm, accessories for impact drills)
Extremely robust the production of solid metal results in an extremely robust body of the Impact Control HSS twist drill bit
free delivery
Bosch Home and Garden 2609255070 DIY Metal Drill Bit HSS-Co 4.5 x 47 x 80 mm (1)
Suitable for alloyed and unalloyed steels, rust-proof stainless steel V2A V4A, stainless steel and cast iron
4.5mm Extra Long Drill Bit, 200mm HSS Twist Drill Straight Shank Auger Drill Bit Twist Drill Straight Shank Auger Drill Bit for Wood
FAST CUTTING-- Sharp twisted drill bits flute will make the drilling easier and more effortless
free delivery
sourcing map 5 Pcs High Speed Steel Hex Shank Twist Drill Bit, 4.5mm Drilling Dia with 1/4 Inch Hex Shank 97mm Length
Specification Shank 1 4-inch Hex; Drill Diameter 4.5mm 0.18-inch; Total Length 97mm 3.82-inch; Drill Bit Length 48mm 1.89-inch; 5 x Twist Drill Bits
Bosch Professional 1x HSS-G Metal Drill Bit (for metal, Ø 4,5 mm, Robust Line, Accessory Drill Driver)
As a leading manufacturer for power tools accessories, Bosch offers the ideal accessories for virtually all applications
sourcing map Solid Carbide Drill Bits, 4.5mm C2/K20 Tungsten Carbide Jobber Drill Bits Straight Shank Drilling Tool for Stainless Steel Aluminum Iron Metal Plastic 2pcs
Tips Used on machining centers, CNC lathes. The longer the length of the tool clamped by the chuck, the better. If the clamping length is shorter, you need to lower the feed rate and cutting speed to reduce vibration and extend the tool life.
Bosch 1pc. HSS-G Drill Bit (Metal, Hard Plastic, Ø 4.5 x 47 x 80mm, Accessory Drill Driver)
Geeignet fr Eisen, legierten und unlegierten Stahl, Nichteisenmetalle, Grausguss, Stahlguss und Hartkunststoffe
sourcing map 10pcs Jobber Drill Bits 4.5mm (11/64") Nitride Coated High Speed Steel (HSS) 4341 Twist Drill Bits for Stainless Steel Copper Aluminum Alloy Metal Wood Plastic, Black
Size - Cutting edge diameter 4.5mm 11 64"; round shank diameter 4.5mm 11 64"; cutting edge length 50mm 1.97"; overall length 80mm 3.15"; split point 135 degree (Fast cutting point penetrates quickly with less pressure and prevents walking on metal surfaces.)
UK Drills 4.5mm HSS Ground Drill Bit Steel Wood High Speed Steel Jobber Twist
UK Drills
free delivery
Bosch 2609255201 75mm Brad Point Drill Bits with Diameter 4mm
With centering tip for exact pilot drilling
Sealey 3pc 75mm Slotted 4.5mm Impact Power Tool Bit Set - AK8251
Forged from high quality S2 steel.
sourcing map 10pcs Cobalt Jobber Drill Bits 4.5mm / 0.177" M35 High Speed Steel HSS Twist Drilling Bit Tool for Stainless Steel Copper Wood Plastic and other Hard Materials
Size - Drilling diameter 4.5mm (0.177"); round shank diameter 4.5mm (0.177"); drilling depth 39mm (1.54"); total length 79.5mm (3.13").
Bosch 2609255141 4 mm Diameter Hex Shank Metal Drill Bit
Quick and effortless drill bit change due to the hexagonal shank
10pcs High Speed Steel HSS Twist Drill Bits 4mm /4.5mm/5.0mm/5.5mm Drilling Tool for Stainless Steel Iron Plate Wood Plastic Aluminum(5.5mm)
TO USE - Hardened cutting edge effectively extends drill bits service life.Three-point positioning offers good precision, making drilling round holes easier.
free delivery
sourcing map Brad Point Drill Bit 4.5mm(11/64") Dia Straight Round Shank Drill Metric Brad Point Spiral Twist Drill Bits for Carpenter Woodworking Plastic Rubber, Golden
Material - Made of High-Speed Steel 4241 with Titanium coating for higher wear resistance, able to withstand higher temperatures, our brad point drill bits are not easy to break and have a long service life.
Bosch 2609255500 110mm SDS-Plus Hammer Drill Bit with Diameter 4mm
Long lifetime
sourcing map 4.5mm Twist Drill Bits, High-Speed Steel Straight Shank Extra Long Drill Bit 250mm Length for Wood Plastic Aluminum
High Speed Steel Made of high-speed steel, with high hardness, heat resistance, wear resistance, durability and long service life.
sourcing map HSS(High Speed Steel) Extra Long Twist Drill Bits, 4.5mm Drill Diameter 200mm Length for Hardened Metal Woodwork Plastic Aluminum Alloy 6 Pcs
Strength and Hardness - Made of high-speed steel. HSS(High Speed Steel) enables the drill body harder and can keep a longer drilling life.
sourcing map HSS(High Speed Steel) Extra Long Twist Drill Bits, 4.5mm Drill Diameter 300mm Length for Hardened Metal Woodwork Plastic Aluminum Alloy 2 Pcs
Strength and Hardness - Made of high-speed steel. HSS(High Speed Steel) enables the drill body harder and can keep a longer drilling life.
sourcing map 24pcs Straight Shank Twist Drill Bits 4.5mm Gold Titanium & Black Nitride Coated High Speed Steel (HSS) 4341 with 4.5mm Shank for Stainless Steel Alloy Metal Plastic Wood
Drill Bit Size Cutting Edge Diameter 4.5mm 0.18"; Shank Diameter 4.5mm 0.18"; Cutting Edge Length 36mm 1.42"; Total Length 80mm 3.15"; Split Point 135 Degree; Cutting Direction Right Hand
Milwaukee HSS-G THUNDERWEB Metal Drill Bit 4.5mm OL:80mm WL:47mm
HSS-G THUNDERWEB Metal Drill Bit 4.5mm (1)
sourcing map Tap & Bit Sets, M6 x 1.5 H2 Straight Flute Machine Thread Milling Tap, 4.5mm M35 Cobalt High Speed Steel (HSS-CO) Twist Drill Bit
Tap & Bit Sets Tap size thread size M6 x 1.5; accuracy H2; total length 70mm 2.76". Drill bit size cutting edge diameter 4.5mm 0.177"; total length 80mm 3.15".
sourcing map 12pcs Jobber Drill Bits 4.5mm Black Nitride & Gold Titanium Coated 4341 High Speed Steel (HSS) 135 Degree Split Point Twist Drill Bits for Stainless Steel Metal Plastic Wood
Wide Applications The drill bits can drill clean and accurate holes in stainless steel, cast iron, A3 steel, carbon steel, aluminum alloy, copper, wood and plastic. Sharp cutting edges provide neat and smooth cuts. Large spiral grooves facilitate the export of metal chips.
sourcing map 5pcs H4.5 Hex Head Drill Bit Wrench 4.5mm Metric Flat Tip 1/4" Hex Shank 100mm (4") Long Magnetic Hexagonal Screw Driver Socket Industrial Screwdriver Power Bits
Size - Metric flat hex head size H4.5 (4.5mm); hex shank size 1 4"; overall length 100mm (4"); hardness HRC59-61 (The recognized stable hardness is around HRC60.). The H value indicates the size of the hexagonal head. The larger the value, the larger the head, and the smaller the value, the smaller the head.
sourcing map H4.5 Hex Head Drill Bit Wrench 4.5mm Metric Flat Tip 1/4" Hex Shank 100mm (4") Long Magnetic Hexagonal Screw Driver Socket Industrial Screwdriver Power Bits
Size - Metric flat hex head size H4.5 (4.5mm); hex shank size 1 4"; overall length 100mm (4"); hardness HRC59-61 (The recognized stable hardness is around HRC60.). The H value indicates the size of the hexagonal head. The larger the value, the larger the head, and the smaller the value, the smaller the head.
sourcing map 10 Pcs High Speed Steel Hex Shank Twist Drill Bit, 4.5mm Drilling Dia with 1/4 Inch Hex Shank 97mm Length
Specification Shank 1 4-inch Hex; Drill Diameter 4.5mm 0.18-inch; Total Length 97mm 3.82-inch; Drill Bit Length 48mm 1.89-inch; 10 x Twist Drill Bits
sourcing map 15pcs M35 Cobalt Twist Drill Bit Set 4.5mm Dia High-Speed Steel Metric Drill Bits 80mm Overall Length for Drilling Cutting Through Hard Metals Stainless Steel
Cobalt Material The drill bit for metal is made of high-speed steel with M35 cobalt, provides high hardness(HRC64-HRC66), good toughness, and wear resistance.
sourcing map 2pcs Twist Drill Bits 4.5mm Titanium Coated (HSS-E) M42 High Speed Steel 8% Cobalt Straight Shank for Stainless Steel Aluminum Alloy Metal
Notes - Choose the right lubricant can facilitate cutting or cooling, make cutting easier, and improve dimensional accuracy. Please pay attention to the speed adjustment when using the electric drill. The larger the drilling size, the slower the speed requirement.
£ 9.29
sourcing map 3pcs H4.5 Hex Head Drill Bit Wrench 4.5mm Metric Flat Tip 1/4" Hex Shank 100mm (4") Long Magnetic Hexagonal Screw Driver Socket Industrial Screwdriver Power Bits
Size - Metric flat hex head size H4.5 (4.5mm); hex shank size 1 4"; overall length 100mm (4"); hardness HRC59-61 (The recognized stable hardness is around HRC60.). The H value indicates the size of the hexagonal head. The larger the value, the larger the head, and the smaller the value, the smaller the head.
sourcing map Tap and Drill Bit Set, 2pcs M5 x 0.5 Metric Straight Flute Thread Screw Taps & 2pcs 4.5mm Twist Drill Bits, Uncoated/Roasted Yellow HSS-6542/M35 HSS-CO Tapping Threading Tool
Tap and Drill Bit Set 2pcs M5 x 0.5 (right hand) thread taps and 2pcs 4.5mm (right hand) drill bit. 6542 (M2) high speed steel tap offers high hardness, good toughness, excellent wear and heat resistance for durability. M35 cobalt high-speed steel drill bit offers improved hardness, wear resistance and cutting performance, as well as higher strength.
Bosch 2607017319 Professional 32-Piece Screwdriver Bit Set (Extra Hard Screwdriver Bit, Drill Driver and Screwdriver Accessories) , Silver , 13cm x 6.7cm x 4.5cm
32-piece screwdriver bit set from Bosch - with a 1 4-inch hexagon shank, ideal for general screwdriving work with screwdrivers and drill drivers
free delivery
sourcing map Cemented Carbide Twist Drill Bits 4.5mm Metal Drill Cutter for Stainless Steel Copper Aluminum Zinc Alloy Iron 6 Pcs
Cemented Carbide Tip 4.5mm twist drill bits are made of cemented carbide tip for long service life, more sharp and durable than others
sourcing map M35 High Speed Steel Straight Shank Twist Drill Bit,Gold Oxide 4.5mm Drill Diameter 200mm Length
Strength and Hardness - Made of M35 HSS(High Speed Steel) cobalt steel. With high hardness and red hardness, wear-resistant, and fast drilling performance.
sourcing map HSS(High Speed Steel) Extra Long Twist Drill Bits, 4.5mm Drill Diameter 200mm Length 4 Pcs
Strength and Hardness - Made of high-speed steel. HSS(High Speed Steel) enables the drill body harder and can keep a longer drilling life.
sourcing map HSS(High Speed Steel) Extra Long Twist Drill Bits, 4.5mm Drill Diameter 250mm Length for Hardened Metal Woodwork Plastic Aluminum Alloy 2 Pcs
Strength and Hardness - Made of high-speed steel. HSS(High Speed Steel) enables the drill body harder and can keep a longer drilling life.
sourcing map M35 High Speed Steel Straight Shank Twist Extra Long Drill Bit, Gold Oxide 4.5mm Drill Diameter 160mm Length
Strength and Hardness - Made of M35 HSS(High Speed Steel) cobalt steel. With high hardness and red hardness, wear-resistant, and fast drilling performance.
sourcing map 3pcs Brad Point Drill Bit 4.5mm(11/64") Dia Straight Round Shank Drill Metric Brad Point Spiral Twist Drill Bits for Carpenter Woodworking Plastic Rubber, Golden
Material - Made of High-Speed Steel 4241 with Titanium coating for higher wear resistance, able to withstand higher temperatures, our brad point drill bits are not easy to break and have a long service life.
sourcing map 6542 High Speed Steel Straight Shank Twist Extra Long Drill Bit, Uncoated 4.5mm Drill Diameter 160mm Length
Strength and Hardness - Made of 6542 HSS (High Speed Steel) steel. With high hardness, wear-resistant, and fast drilling performance.
sourcing map 10Pcs Cobalt Drill Bits Double Ended 4.5mm/0.177" M35 High Speed Steel Twist Drill Bit Stubby Body for Hardened Steel Wood Plastic Cast Iron
Size - The Drill Bits Double Ended is about 4.5mm 0.177" in diameter, 18mm 0.71 inch in flute length, and about 57mm 2.24 inch in length. The sufficient quantity can meet your daily use needs; please pay attention to control the speed, pressure and heat when using the drill bit.
sourcing map Solid Carbide Twist Drill Bits 4.5mm, Metric Left Hand Spiral Flutes Straight Shank Tungsten Steel Drilling Tool for Stainless Steel Alloy Metal
Carbide Tool Constructed from micro grain YG6X C3 K10 tungsten carbide, the drill bit is hardened up to 91HRA, wear resistance, corrosion resistance, heat resistance, and good bending strength.
Draper 2pcs HSS Titanium Nitride Coated Drill Bit, 4.5mm x 80mm - 08866 - for Steel, Non-Ferrous Metals, Wood and Hard Plastic
Compatible with a standard 10 13mm chuck
free delivery
sourcing map 2pcs M35 Cobalt Twist Drill Bit 4.5mm(11/64") Dia High-Speed Steel Metric Drill Bit with Titanium Coating For Drilling Hard Metals, Stainless Steel, Alloy Steel, Cast Iron
Size - Working Diameter 4.5mm(11 64 inch) ; Working Length 39mm 1.54 inch; Shank Diameter 4.5mm(11 64 inch); Total Length 80mm 3.15 inch
sourcing map Hand Reamer 4.5mm Alloy Tool Steel H8 6 Straight Flutes Hand Milling Cutter Tool Metric Reaming Drill Bit for Metal
Straight Flute Reamer Allows chips and debris to escape easily from the hole, well suited for most applications in shallow cuts. Can achieve the required roundness, straightness, and concentricity of the hole.
sourcing map 4.5mm Twist Drill Bits, High-Speed Steel Straight Shank Extra Long Drill Bit 300mm Length for Wood Plastic Aluminum
High Speed Steel Made of high-speed steel, with high hardness, heat resistance, wear resistance, durability and long service life.
£ 7.79
sourcing map Tap and Drill Bit Set, 1pcs M5 x 0.5 Metric Spiral Point Thread Screw Taps & 1pcs 4.5mm Twist Drill Bits, Titanium Coated HSS-6542 Tapping Threading Tool Kit
Tap and Drill Bit Set 1pcs M5 x 0.5 (right hand) thread taps and 1pcs 4.5mm (right hand) drill bit. 6542 (M2) high speed steel screw tap & drill bit set offers high hardness, good toughness, excellent wear and heat resistance for durability, and good cutting performance for clean, precise holes.
sourcing map 10pcs M35 Cobalt Twist Drill Bit 4.5mm(11/64") Dia High-Speed Steel Metric Drill Bit with Titanium Coating For Drilling Hard Metals, Stainless Steel, Alloy Steel, Cast Iron
Size - Working Diameter 4.5mm(11 64 inch) ; Working Length 39mm 1.54 inch; Shank Diameter 4.5mm(11 64 inch); Total Length 80mm 3.15 inch
sourcing map 2pcs #1 Phillips Screwdriver Bit PH1 1/4" Hex Shank 8" (200mm) Long Magnetic S2 Steel Industrial Grade Screw Driver Bit Cross Head Electric Drill Bits 0.177" (4.5mm) Rod
Size - Phillips head size PH1 (#1); hex shank size 1 4"; overall length 200mm 8"; rod diameter 4.5mm 0.177"; hardness HRC59-61 (The recognized stable hardness is around HRC60.). Screws for large household appliances are mainly PH2, those for small household appliances are mainly PH1, and those for precision instruments are mainly PH0 PH00 PH000.
sourcing map 3pcs Brad Point Drill Bit 4.5mm(11/64") Dia Straight Round Shank Drill Metric Brad Point Spiral Twist Drill Bits for Carpenter Woodworking Plastic Rubber
Material - Made of High-Speed Steel with polished surface for higher wear resistance, able to withstand higher temperatures, our brad point drill bits are not easy to break and have a long service life.
sourcing map Cemented Carbide Twist Drill Bits 4.5mm Metal Drill Cutter for Stainless Steel Copper Aluminum Zinc Alloy Iron 4 Pcs
Cemented Carbide Tip 4.5mm twist drill bits are made of cemented carbide tip for long service life, more sharp and durable than others
sourcing map Chucking Reamers, 4.5mm H8 Metric Machine Reamer Drill Bit for Metal Wood Hole Reaming, Straight Flute M35 High Speed Steel Tool
M35 Cobalt High Speed Steel Offers improved hardness, wear resistance, cutting performance, excellent heat resistance and higher strength than regular high-spedd steel tools. With just a base substrate (no additional coating), suitable for a wide range of applications.
Makita B-53811 Drill & Screwdriver Bit Accessory Set (100 Piece), Multi-Colour, Set of 100
- 1 x hole saw adapter
sourcing map Twist Drill Bit, 4.5mm Jobber Drill Bit Nanoscale Titanium Coated K35 Tungsten Carbide Straight Shank 100mm Length for Drilling Stainless Steel Alloy Steel
Drill Bits Cutting edge diameter 4.5mm 0.177"; cutting edge length 60mm 2.36"; shank diameter 4.5mm 0.177"; overall length 100mm 3.94"; cutting hardness (max.) HRC55. Sharp cutting edge provides smooth cutting and no glitches.
free delivery
sourcing map Cemented Carbide Twist Drill Bits 4.5mm Metal Drill Cutter for Stainless Steel Copper Aluminum Zinc Alloy Iron 2 Pcs
Cemented Carbide Tip 4.5mm twist drill bits are made of cemented carbide tip for long service life, more sharp and durable than others
free delivery
sourcing map 10pcs Jobber Drill Bits 4.5mm (11/64") Black Nitride & Gold Titanium Coated High Speed Steel (HSS) 4341 Twist Drill Bits for Stainless Steel Copper Aluminum Alloy Metal
Size - Cutting edge diameter 4.5mm 11 64"; round shank diameter 4.5mm 11 64"; cutting edge length 52mm 2.05"; overall length 80mm 3.15"; split point 135 degree (Fast cutting point penetrates quickly with less pressure and prevents walking on metal surfaces.)
free delivery
Dewalt DT5044QZ 4.5 x 80 mm Extreme 2 Metal Drill Bit
Gold Ferrous Oxide coating prevents overheating
