Trend CraftPro Straight Two Flute Router Cutter Bit, 1/2 Inch Shank, 6mm Cut Diameter & 16mm Cut Length, Tungsten Carbide Tipped, C005X1/2TC
Product description
- TUNGSTEN CARBIDE TIPPED 2.0mm micro-granular extra-hard tips for prolonged sharpness and cutter durability. Ideal for cutting softwood, hardwood, and man-made timber boards.
- PTFE NON-STICK COATING Its PTFE non-stick coating reduces friction, minimises resin build-up and extends the cutter's lifespan for uninterrupted router performance.
- PRECISION CUTTING The highly ground tip face is polished to 800-grit to ensure accurate cutting with a fine finish for professional routing results.
- SAFETY & COMPATIBILITY Longer shanks accommodate both handheld and table routers. Features a Safety K-Mark for optimal shank positioning. EN Shank Markings for visible cutter safety data.
Other 6mm routers bit 1 2 shank on offer
≡ Sort & Filter
Trend CraftPro Straight Two Flute Router Cutter Bit, 1/4 Inch Shank, 6mm Cut Diameter & 20mm Cut Length, Tungsten Carbide Tipped, C005BX1/4TC
TUNGSTEN CARBIDE TIPPED 2.0mm micro-granular extra-hard tips for prolonged sharpness and cutter durability. Ideal for cutting softwood, hardwood, and man-made timber boards.
To the offer
Rennie Tools - 2mm Cutting Diameter x 6mm Flute x 1/4" Shank TCT Tipped 2 Flute Straight Router Cutter Bit Compatible With Makita Bosch Trend Katsu Dewalt Router Etc. 2mm Router Bit
These 1 4" shank router bit cutters are designed for general routing, grooving, rebating, dados, mortising and edge trimming. Each has a strong, hardened steel shank and tungsten carbide tipped (TCT) cutting edges and are precision ground for a dimensionally precise finish.
To the offer
Faithfull FAIRB23 Router Bit TC Two Flute 1/4in 6mm
With careful handling and under normal conditions, they will outlast HSS grade cutters many times
To the offer
sourcingmap 5PCS 1/8" Shank 1.0mm x 6mm Carbide End Mill CNC Router Bits 2 Flute Milling Bit for Acrylic PVC MDF Wood
Carbide End Mills Tungsten carbide has good wear resistance, high strength and resistance to cutting temperatures. Carbide can run at higher speed than high-speed steel. Chamfered shank for ease of use
To the offer
Trend Professional Straight Two Flute Router Cutter Bit, 1/4 Inch Shank, 6mm Cut Diameter, 25mm Cut Length, Tungsten Carbide Tipped, 3/24X1/4TC
TUNGSTEN CARBIDE TIPPED 2.0mm micro-granular extra-hard tips for prolonged sharpness and cutter durability. Ideal for cutting softwood, hardwood, and man-made timber boards.
To the offer
Rennie Tools - 2mm Cutting Diameter x 6mm Flute x 1/2" Shank TCT Tipped 2 Flute Straight Router Cutter Bit. Compatible With Makita Trend Festool Hikoki Dewalt Router Etc. 2mm Router Bit
These 1 2" shank router bit cutters are designed for general routing, grooving, rebating, dados, mortising and edge trimming. Each has a strong, hardened steel shank and tungsten carbide tipped (TCT) cutting edges and are precision ground for a dimensionally precise finish.
To the offer
Trend Professional Straight Two Flute Router Cutter Bit, 1/2 Inch Shank, 6mm Cut Diameter, Tungsten Carbide Tipped, 3/2X1/2TC
TUNGSTEN CARBIDE TIPPED 2.0mm micro-granular extra-hard tips for prolonged sharpness and cutter durability. Ideal for cutting softwood, hardwood, and man-made timber boards.
To the offer
CoCud Square Nose End Mill, 1mm x 5mm Cutting 6mm Shank, HSS-AL 2 Flutes CNC Router Bit Milling Cutter - (Applications: for Aluminum Alloy Copper Plastic)
HSS-AL --- High-speed steel tool has toughness, good wear resistance, heat resistance, and can withstand high cutting speeds. Aluminum coating on high-speed steel end mills provides additional lubricity and heat resistance, reducing friction. It helps improve chip evacuation and extends tool life.
To the offer
sourcing map 10pcs Spiral CNC Router Bits 1.0mm Diameter 1/8" Shank Up Cut 2 Flutes Solid Carbide End Mill Milling Bits with 6mm Cut Length for Wood Plastic Soft Metal Aluminum
Spiral Router Bit Size Upcut spiral router bit with 1.0mm (1 25") cutting diameter, 1 8" shank, 6mm (1 4") cutting length, 38mm (1-1 2") total length, upcut (right hand) cut type, 2 flutes. Large spiral flute design helps effectively remove chips during cutting, reducing clogging and improving chip evacuation.
free delivery
To the offer
Trend Professional Straight Two Flute Router Cutter, 1/4 Inch Shank, 6mm Cut Diameter, Tungsten Carbide Tipped, 3/2X1/4TC
TUNGSTEN CARBIDE TIPPED 2.0mm micro-granular extra-hard tips for prolonged sharpness and cutter durability. Ideal for cutting softwood, hardwood, and man-made timber boards.
To the offer
sourcing map T Slot Cutter Rabbet Router Bit 1/2" Shank 1-13/32" (36mm) x 15/64" (6mm) 3 Wing Carbide Slotting Cutter Rabbeting Slab Flattening Router Bits with Bearing for Wood
Note - Securely clamp or hold down the workpiece to prevent it from moving during routing, ensuring clean and accurate cuts. Maintain a consistent feed rate while routing to achieve smooth and even cuts. Always wear appropriate safety gear to protect yourself.
To the offer
Trend CraftPro Straight Two Flute Router Cutter Bit, 8mm Shank, 6mm Cut Diameter & 25mm Cut Length, Tungsten Carbide Tipped, C005AX8MMTC
TUNGSTEN CARBIDE TIPPED 2.0mm micro-granular extra-hard tips for prolonged sharpness and cutter durability. Ideal for cutting softwood, hardwood, and man-made timber boards.
To the offer
Gasea 4pcs 1/4" Shank Flush Trim Bits Set Top End Bearing Router Bit Set, 1/4" 5/16" 3/8" 1/2" Cutting Diameter Milling Bits for Woodworking Tool
Use on CNC and other automatic routers as well as hand held and table mounted portable routers.
To the offer
Trend Professional Straight Two Flute Router Cutter, 1/2 Inch Shank, 6mm Cut Diameter, Tungsten Carbide Tipped, 3/24X1/2TC
TUNGSTEN CARBIDE TIPPED 2.0mm micro-granular extra-hard tips for prolonged sharpness and cutter durability. Ideal for cutting softwood, hardwood, and man-made timber boards.
free delivery
To the offer
YOKOCUT Guided Rounded Over Router Cutter Bit, 1/4 Inch Shank, 1.6mm Radius and 6mm Cut Length, Tungsten Carbide Tipped Router Bit (B/Guided OVOLO 1.6MM RAD - 1/4 SHANK)
Unleash your creativity with the YOKOCUT Ovolo & Handrail Router Cutter, a top choice for crafting intricate profiles and shaping wooden handrails. Elevate the elegance of staircases and furniture pieces effortlessly.
To the offer
WSOOX 4 Pcs Round Over Edge Forming Router Bit Set with 6mm Shank, Corner Rounding Edging Cutter Milling Tool Set
MATERIAL --- The cutter is made of premium quality C3 Micro-grain carbide, industrial quality Router bits; build-up & heat resistant teflon coating, anti-kickback design and CNC balanced
To the offer
Linkstyle 10PCS 1.5-6mm HSS Drill End Mill Bits Set, 4 Flute CNC Carbide Straight Shank Milling Cutter Tool for Wood Aluminum Steel Titanium Metal
Efficient Processing The milling cutter set is made of high-speed steel (HSS), excellent wear-resistant and heat-resistant, durable and tough, ideal for high-speed cutting and long-term use
To the offer
Trend CraftPro Guided Rounded Over Router Cutter Bit, 1/4 Inch Shank, 1.6mm Radius and 7.9mm Cut Length, Tungsten Carbide Tipped, C074AX1/4TC
PRECISION CUTTING The highly ground tip face is polished to 800-grit to ensure accurate cutting with a fine finish for professional routing results.
free delivery
To the offer
1/2/3pcs Tongue & Groove Joint Assembly Wood Router Bit With A Small 45 Degree Lock Miter Router Bit Wood Cutting - 6mm 1/4" Shank(6.35mm shank 3PC)
1 2 3pcs Tongue & Groove Joint Assembly Wood Router Bit With A Small 45 Degree Lock Miter Router Bit Wood Cutting 6mm 1 4" Shank
free delivery
To the offer
1pc 1/4",6mm Shank Round-Nose Plunge Router Bit - Shank Bearing - 1/2"W X 5/8"H For Woodworking Cutting Tool(6X12.7)
1pc 1 4" ,6mm Shank Round-Nose Plunge Router Bit - Shank Bearing - 1 2"W X 5 8"H For Woodworking Cutting Tool
free delivery
To the offer