iShoot Lens Collar Tripod Mount Ring Compatible with Canon RF 100mm f/2.8L Macro IS USM, Lens Support Holder Bracket Bottom is Arca-Swiss Fit Quick Release Plate for Arca Fit Tripod Head Clamp(Disclaimer)

Product description

• 1. The lens collar is designed and improved based on the original model E (B), only compatible with Canon RF 100mm f/2.8L Macro IS USM, cannot be used with other lenses.
• Like the original factory, it supports horizontal and vertical shooting.
• When shooting vertically, the lens can be rotated by loosening the knob; 2. The plastic ring is made of PC material and made from precise molds; the inner wall of the ring is designed with three bumps on the surface, corresponding to three notches on the surface of the lens; the plastic ring weighs about 10g; 3. The tripod mount ring adopts a split structure, the edges and corners are polished, and the inner wall is affixed with a plastic film, will not wear lens surface when installed correctly; the locking knob has a non-slip design, released and pulled out to unlock; hollow-out weight reduction design, net weight is about 165g; 4. There should be no stickers on the lens surface installation position, if there is, remove it, otherwise it will affect the normal installation; install the plastic ring first, when installing, please align the points carefully, otherwise the plastic ring may be offset; and then install the metal tripod ring; 5. The tripod collar bottom is added 70mm long 39mm Arca fit quick release plate feature, can be used with 39mm Arca-Swiss fit tripod ball head, panoramic head and clamp directly; more practical than lens collars without QR-Plate; also reserved 1/4" and 3/8" screw holes and stainless-steel anti-slip screws for fixing lens to tripod directly.