Power Meter Electricity Usage Monitor 8 Modes, Energy Monitor Plug with LCD Backlight Overload Sound Alarm.Energy Meter Power Consumption Monitors Socket KWH Amp Volt Watt Monitoring Meter Plug(Disclaimer)

Product description

• [Various Monitoring Parameters] The energy monitor can monitor the power (W), energy (kWh), volts, amps, hertz, power factor, cost,minimum and maximum power (W), cumulative days and time of your appliances. By switching 8 display modes, you can easily know the various parameters while the appliance is working.
• These power monitors can also calculate and display how much power your appliance uses and how much electricity bill it cost in cumulative time for energy saving [Overload Protection] The default overload of the energy monitor plug is 2900W.
• When the power of the appliance exceeds the overload power, the LCD will display "OVERLOAD" and emit a "beep" sound to warn the user.
• All the buttons of wattage meter will quit working and can only work again when the overload alarm has been cleared by raising the setting value or removing the appliances [Data Memory Function] The energy monitor will record your power consumption data when you remove electric meter from socket, or remove appliances from the power meter.
• All setting data and cumulative data(electricity quantity, cost, unit price) will be saved. You can directly see the last data when you use the electricity usage monitor next time(NOT including current, voltage, power, power factors).
• This function can also automatically save the data when there is a sudden power failure [KWH Alarm Settings] You can set a power consumption limit, and when the accumulated power consumption reaches the set value, the energy monitoring plug uk will emit a "beep" sound, and the "KWH" alarm will flash continuously to alert the user.
• If you want to silence the alarm, you can set a higher power consumption limit or reset the power consumption limit (Note: resetting will clear all settings) [Adjustable Backlight Time] Our watt meter has 5 options of backlight time.
• The default backlight time duration is 10 minutes(bL-0). If you want to change the backlight time, you can press and hold "UP" and "DOWN" button at the same time to ente