Best choice
sourcing map PVC DWV Reducing Coupling Schedule 40 Gray 40mm x 63mm Socket
Easy to install PVC is lightweight, easy to install, requires no special tools for cutting and is installed by solvent cementing.
£ 12.19
39% discount
BFG Reducing Socket (1/2 inch Female Thread (Ø 20mm)) / (3/8 inch Female Thread (Ø 15mm)) - 4 Pieces Brass Reducing Socket with 1/2" and 3/8" Internal Thread for Drinking Water
EASY ASSEMBLY Factory notches on the male threads facilitate and speed up sealing with well-known sealants such as hemp, thread sealing thread or Teflon tape.
£ 8.95
36% discount
KingYH 2 Pack Impact Driver Conversions 1/2 to 3/8 Impact Socket Adapter and Reducer Set Female to Male Impact Adapter Driver Conversions Bit for Air Pneumatic Electric Ratchet Wrenches and Ratchets
Package 4 Pieces impact socket adapter, size connect 1 2" (F) drive tools to 3 8" (M) drive sockets.
£ 6.99
CHARNWOOD 100/63RC REDUCING Cone 100mm to 63mm
Reducing cone used to step down or up in hose size and used to for connecting to machinery with different sized outlets.
free delivery
26% discount
T-mex 50mm-40mm 09.0814 Flexible Adaptor, Black, 50 x 40m O.D & 1 ½” x 1 ¼” NB (48 x 42mm O.D)
Flexible Adaptor Reducer To Suit 50mm x 40mm Pipe
£ 11.49
Create idea 2PCS Reducer Double Nipple 3/4 Inch Internal Thread to 1/2 Inch External Thread Tap Adapter Pipe Fitting Connector with Sealing Rings Stainless Steel
No need to use a hex key compatible with installation, just tighten it to the external thread, and install it directly on the top of the isolation valve.
Recommendation
Reducer Brass 1 1/4"- 1" with External and Internal Thread for Connecting Pipe - ONIX TECH
COMPATIBILITY - Brass reducer pipe fitting with 1 1 4" male thread and 1" female thread, designed for connecting copper, brass, and steel pipes in water supply, heating, and gas systems
Steinberg14 150 mm to 125 mm Pipe Reducer Adapter for Ventilation Pipe Ducts Pipe Connector
Lightweight, quick and easy to assemble
PATIKIL M10 to M6 Reducing Screw, 5 Pack 30mm Long External Thread Adapter Reducer Convert Joint Hardware Double Male Thread Bolts
Specification Material Carbon Steel; Bigger External Thread M10; Smaller External Thread M6; Thread Pitch 1mm; Height 30mm 1.18 inch; Inner Diameter 3.5mm 0.14 inch
tecuro 58722 Reducer Adaptor for Siphon Drain 1 1/4 Inch Internal Thread x 1 1/2 Inch External Thread with Seal Plastic White
IDEAL SOLUTION Perfect when traditional brass siphons are not suitable for technical reasons. Perfect fit and functionality.
60 Pcs Self-Tapping Thread Inserts, Helicoil Thread Repair Insert, Thread Repair Kit, M3 M4 M5 M6 M8 M10 M12 Internal Thread Set for Metal Plastic Processing Industry
High-Quality Material This thread repair insert set is made of superior stainless steel material, which is corrosion-resistant and rustproof, not easy to break, maintaining high strength and excellent performance in harsh environments, durable for long-term use.
Sanitop-Wingenroth, malleable cast Iron Reducer Number 241, with Internal Thread, Silver, 13187 2
Ideal for expanding water installation
Compressor Accessory 4139605 Reducer R3/8 Inch Internal Thread / R1/2 Inch External Thread
Package Weight 1.102 pounds
15mm to 10mm Internal Reducing Kit for NWT Towel Rail & Radiator Valves
Valves for towel rails & radiators
free delivery
Hortafix Pond Pipe corrugated pipe Reducing Joiner 1 1/2" 38mm to 1 1/4" 32mm
Fits pipe with Internal Diameter 38mm 1 1 2" (36mm Internal)
free delivery
CIENCIA SBA025 Reducer 3/8 to 1/2 Brass Thread Fitting Reducer 1/2 Inch Male Thread - 3/8 Inch Internal Thread Adapter 1/2 Inch x 3/8 Inch Female Thread
Male G1 2 inch (BSP) threads on one end and female G3 8 inch (BSP) threads on the other for connecting pipes with different ends.
YRAKOZIN Brass Reducer, 3/4 Inch x 1/2 Inch Male Thread, External Thread Diameter 26.5 mm x Internal Thread Diameter 19 mm, Suitable for Drinking Water, Sanitary Connectors, Accessories for Water
Applicable size reducer - 3 4 inch male thread x 1 2 inch IG, external thread diameter 26.5 mm x internal thread diameter 19 mm
High Pressure Washer Coupler Metric M22 14mm Male to M22 14mm Female Reducer Thread Connector Internal Thread Fitting Reducing Bushing Hose Garden Water Pipe Hex Bushing Reducer Adapter 4500 PSI
Universal Compatibility & Seamless Connection Engineered for pressure washer connector, this adapter set easily connects M22 14mm male To M22 14mm female threads, bridging the gap between pressure washer guns, hoses, and fittings. Perfect for both DIY enthusiasts and professionals, it ensures a tight, secure, and efficient connection, enhancing the performance of your pressure washing setup. Note Please allow 1-3mm error due to manual measurement. Thanks for your understanding.
16% discount
GARDENA Brass Reducer: Brass connecting Piece to The Pipe Connection with a quick coupling, 33.3 mm (G 1 ') - AG / 26.5 mm (3/4 ") - IG (7271-20)
Scope of delivery includes 1x Gardena brass reducer
£ 6.52
TAILONZ PNEUMATIC 2PCS Brass Pipe Fitting, Reducer Adapter, Hex Nipple, 1/2-Inch Male Pipe x 3/4-Inch Male Pipe
Widely Used Used for connecting a variety of pipes such as gas, oil and water pipes as well as pneumatic tools.
M10 to M8 Thread Reducer 10 Pieces Thread Insert Repair Sleeve with Thread Screw for Repairing Thread Dents, Made of Stainless Steel Internal Thread
Efficient thread error repair The insert nut can be used to efficiently repair damaged thread holes and restore original functionality
13% discount
ERGAOBOY 2 Pcs 3/8" BSP Female to 1/2" BSP Male Brass Reducer Hex Bushing Threaded Pipe Fitting
Working Parameters 0-1 MPA and -50-120 C.
£ 7.99
Multi Size Hose Tail CONNECTORS for Corrugated Pond Pipe (Range of Sizes) Sent from UK! (-20/25/32/40mm) 47.8mm Across The Thread
Versatility Our collection of Male and Female BSP Threaded Stepped Adaptors is available in various sizes to accommodate different diameters of corrugated flexible pond pipes. This versatility simplifies your pond plumbing needs and ensures compatibility with your existing setup.
free delivery
CHARNWOOD 63/56RC Reducing Cone 63mm to 56mm (2-1/2" to 2-1/4")
Used for stepping down or up in hose size and used for connecting a hose line to machinery with a different sized outlet.
free delivery
13% discount
Ibergrif M3/8"-M1/2" UK Compression Adaptors Connector from 3/8 Inch to 1/2 Inch, Metal, Chrome, Silver
Reducing adapter can be used for 13mm EU taps and 15mm UK faucet, and black rubber washer has a good sealing performance.
£ 4.15
13% discount
Bosch 1x PRO Reduction Rings for Circular Saw Blade (Ø 25,4 mm, Professional Accessory Hand-Held Circular Saw, Hand-Held Dry Cutter)
8 mm; Reduction rings for circular saw blades; Base blade thickness of 2
£ 3.43
Brass Reducer with External and Internal Thread 1/2"-3/8" - Warranty 10 Years - MONTERAL
COMPATIBILITY - Brass reducer pipe connector with 1 2" male thread and 3 8" female thread, suitable for connecting plumbing pipe copper pipe, brass pipe, steel pipes in water, heating and gas supply systems
7% discount
Stainless Steel Thread Insert, Self Tapping Thread Insert, Inner Thread Inserts to Improve Strength and Stability of Screws Connection and Repair the Damaged Thread
Easy to Install Self-tapping thread can be installed easily and quickly with only one assembly tool, with good air tightness; it can also repair damaged threads by installing into threaded holes
£ 14.53
McAlpine DC2BL-OS Offset Drain Reducer Connector, Black
Sealing ring to fit BS EN 1451 2000 and BS EN 1329-1-2000 plastic waste pipe
£ 14.87 free delivery
H&C VENT Pack of 3 Universal Duct Reducer Connector │ Ventilation Pipe PVC Adaptor │ Plastic Transition Ø3.14’’-5.9’’/ Ø80-150mm Round Ducting & Flexible Hose │ Extractor Fan Tumble Dryer Conditioner
Size and technical data Easily adjust round ventilation pipe diameters with this Universal Multi-Stage Ducting Reducer for 80 100 120 125 150 mm 3.14 3.93 4.72 4.92 5.90 pipe systems. Performance - up to 900m3 h. Connection type male spigot, can be used as female spigot too. Simply cut the connector to the required size and connect your ducts effortlessly!
DOJA Industrial | Threaded Sleeve M6 | Pack 30 | Round Connector Nuts Pipe Reducer Sleeve with Internal Thread Fitting Plumbing Fittings | Coupling nut for Bolts and Nuts Metal bar for Threaded Rod
Various sizes - Metric 6, 8 and 10 - Length 30mm ( Choose the size you need for your bolts )
Domus 150mm to 100mm Reducer Adapter for Round Pin
Depth 60mm
free delivery
26% discount
2X Reducer Pipe Hose Tube Connectors for Fuel Air Water/Heater Hose, Tube or Pipe - Free First Class UK Postage!
Hose Pipe / Tube Connectors
£ 3.29 free delivery
Ibergrif M3/8"-M1/2" UK Compression Adaptors Connector from 3/8 Inch to 1/2 Inch, Metal, Chrome, Silver
Reducing adapter can be used for 13mm EU taps and 15mm UK faucet, and black rubber washer has a good sealing performance.
free delivery
Kair Ducting Reducer 150mm to 100mm / 6 to 4 inch Duct Pipe Reduction Connector
DIY and Trade use. Tumble Dryer, Bathroom Kitchen extractor fan, In-Line Extract Fans, Cooker Hood.
5 Pcs Threaded Bush Adapter BSP Fittings 1/2 External Thread to 1/4 Internal Thread for Joining Air Line Hose
Material Made of carbon steel and stainless steel, durable.
SG Store 2 PCS BSP 1/2 Inch Stainless Steel Male Thread to Female Thread Plumbing Fittings Elbow Internal and External Reducers for Water Pipe Sanitary Connection
Size 1 2" BSP female x 1 2" BSP male. Max. working pressure 1,0 MPa (10 bar); Max. working temperature 95 C.
25mm > 13mm Plastic Hose Straight Fitting Reducer Pipe Reducing Adapter
Black Strong Heavy Duty Material
Be In Your Mind 4Pcs 1/2 Male to 1/4 Female Connector Water Pipe Reducer Fittings Thread Reducer Accessories for Pipes Radiators Water Tanks Sanitary Facilities BSP Thread
Practical Reducer Adapter Thread reducer comes in 2 sizes, so you can easily convert the 1 2 inch water pipe into 1 4inch. Suitable for garden water pipe, convenient and practical.
Mxfans Power Tool Vacuum Hose Fitting Reducer 00177 Extraction ABS 32mm ID Black
Equipped with internal threaded conversion tube.
MiJunHD IBC Storage Tank Reducing Adapter S60x6 60mm Coarse Thread to G 3/4=25mm=DN20 Female Thread Reducer Connector for Homes, Gardens, Water Tanks (1 Piece)
IBC Water Tank Adapter S60x6 60mm coarse thread to G 3 4 25mm DN20 female thread outlet
1/2” Female to 3/8” Male Adapter, 6 Pcs BSP Thread Brass Hose Connectors, Reducer 1/2 to 3/8 Hex Bushing Reducing Connector Fittings for Water, Gas, Pipe, with Sealing Rings
Package Includes You will receive 6 pcs reducers 1 2 to 3 8, equipped with black rubber sealing gaskets, sufficient quantity to meet the needs of different fields. The installation process is easy, even for amateurs or beginners.
M8 to M10 Thread Reducer Adapter 10 PCS, Reducing Thread Inserts Nuts Female M8 X 1.25 and Male M10 X 1.5 Flat Head Threaded Rivnuts, for Furniture Projects Automotive Electrical Industrial
Size The reducing nut has an internal thread of M8 X 1.25 and an external thread of M10*1.5 and a length of 12 mm, which allows the M8 thread to be reduced to M10, effectively preventing the bolt from loosening
McAlpine DC3-BL Drain Reducer Connector-4"/110mm x 2", Black
Size 4" 110mm x 2" Finned seal Spigot for internal connection to 4" 110mm cast iron, plastic or clay Ideal for low level connections Sealing ring to fit BS EN 1451 2000 and BS EN 1329-1-2000 plastic waste pipe Manufactured in polypropylene
free delivery
MiSevteen 4-Pack Brass 1/2" to 3/8" BSP Reducing Connector, Hex Hose Pipe Reducer Fittings for Garden Hose, Irrigation, Radiators & More
Safety Healthy and sanitary. Brass reducing bush adaptor will not pollute water quality and chemically stable, provide you with a relaxed and practical experience.
20 Pcs Thread Inserts Kit, Thread Reducer M8 to M6, Male Female Reducing Nut Repair Tool, Inner M6*1.0/Outer M8*1.25, Self Tapping Threaded Insert Stainless Steel for Furniture Automobiles
Exquisite Material These thread reducers are made of high-quality stainless steel material, stable structure, excellent performance, corrosion and rust resistance, high strength, can maintain high performance even in harsh environments, durable and can be used for a long time.
2 x 15mm to 10mm Reducer Couplers for Radiator Tap Compression Fitting Internal Reducer for Radiator Valves 15mm to 10m 2X PCS
myhomeware
free delivery
XIATIAN 20 Pcs Thread Inserts, Thread Adapters Sleeve Reducing Nut, Thread Reducer M6*1.0 Male to M8*1.25 Female Reducing Nut, Thread Repair Insert Stainless Steel for Repair Tool
Exquisite Craftsmanship The stainless steel threaded adapter has a smooth surface and precise and clear threads, providing good connection performance, increasing connection strength and improving connection effect. The self-tapping threaded insert has a certain elasticity, uniform force, vibration resistance, stable thread connection strength and long service life
4 Pack Tap Aerator M18/M20/M22/M24/M28, Water Saver Tap Filter Nozzle Faucet Aerator Replacement Parts - Internal Thread (M22)
Easy to install screw the aerator directly into the faucet or tighten with a wrench
4-Piece Reducer Adapter - Brass, 1/2 Male to 1/4 Female Thread Hex Hose Pipe Connector for Tap, Barrel, Rainwater Tanks & Garden Hose
Package Contents 4 Pieces reducer bushing connector, size the diameter of the external thread is 1 2 inch (20mm), the diameter of the internal thread is 1 4 inch (11.5mm).
Set of 10 Silver Reducer Rings to Modify Internal Diameters on Different Types of Saws (20-16)
Adjustment and Conversion Used for adjusting and converting alloy saw blades and other mounting holes to smaller sizes.
free delivery
1/2” Female to 3/8” Male Adapter, 4 Pcs Stainless Steel Reducer Reducing Adapter 1/2" BSP Female x 3/8" BSP Male Hose Connectors for Pipe Connecting Conversion
Universal Size You will receive 4 pcs reducer 1 2" internal thread to 3 8" external thread Suitable for hoses, washing machines, water pipes, taps, etc.
7% discount
Helicoil Thread Repair Insert, Thread Repair Kit, 10Pcs Internal Thread Set Threaded Insert Nuts, Female Thread M8 x 1.25, Male Thread M12 x 1.75 Thread Adapter, Thread Reducer Adapter
Thread repair solution The repair nut provides an efficient solution for thread errors or damaged threaded holes. It effectively repairs the threaded hole, ensuring smooth and accurate threading for screws or bolts.
£ 8.39 free delivery
Kair Ducting Reducer 150mm to 100mm / 6 to 4 inch Duct Pipe Reduction Connector
DIY and Trade use. Tumble Dryer, Bathroom Kitchen extractor fan, In-Line Extract Fans, Cooker Hood.
SOMATHERM FOR YOU //101-26-15 Reduktion F26 / 34-M15 / 21 Brass Reducer-Female 26/34-15/21 Male, Single Unit, Weiblich 26/34-männlich 15/21
Reduces
MYCZLQL 1pcs Tri Clamp Reducer Short Flange OD End Cap Reducing 1.5"/2"/ 2.5"/3"/3.5"/4", SUS 304 Stainless Steel Sanitary Home Brew Beer (Size : 77.5mm-50.5mm)
hose connectors Easy installation allows fast and comfortable connection with no tool required, quick joint to make tap and hose connecting easily
free delivery
TEFEN 12mm x 8mm Plastic Nylon Barbed TUBING Connector Fuel Rubber Pipe Joiner Hose Inline Repair
Hose Reducing Connector 12mm x 8mm PN 12445652488
YSDMY 20 Pcs Wire Thread Inserts M6 / M8 Thread Insert, Self Tapping Thread Insert, Male Female Reducing Nut, Stainless Steel Thread Reinforce Repair Tool
High Quality Thread Inserts are made of high quality stainless steel, with stable structure, excellent performance, corrosion and rust resistance, high strength, not easy to break, can be used in harsh environments, and have a long service life
WideSmart 6Pcs Brass Finish Connector,Brass Fitting Couplers Gas Convertor Quick Connect Hex Bushing Reducer Adapter for Gas Stove Gas Cooker Gas Hose(External Thread PT1/4-Internal Thread M14X1.5)
Easy to use Connect the adapter to the burner gas valve and press firmly, then rotate the lock adapter to connect the long gas tank, and finally connect the adapter to the burner gas valve. It is not easy to leak or burst, and it is safer and makes you feel more comfortable.
304 Stainless Steel Reducer Pipe clamp External Connection Internal Thread Joint Reducer Pipe Joint Water Heating HMCOCOOFM(DN25-10)
HMCOCOOFM
free delivery
Hunter Downpipe 50mm Down Pipe Reducer - 68 to 50MM Black R666
Hunter Plastics
CHARNWOOD 63/45RC Reducing Cone 63mm to 45mm (2-1/2" to 1-3/4")
Used for stepping down or up in hose size and used for connecting a hose line to machinery with a different sized outlet.
free delivery
ZUDKSUY 10Pcs 3/4-Inch External Thread to 1/2-Inch Internal Thread PVC Reducer Bushing for PVC Pipe Fittings, Adapter for Swimming Pools Outdoor Applications Cold Water Supply Lines (0.75in - 0.5in)
Leak Prevention Design Uses Teflon tape on the ends to effectively prevent leaks, ensuring a reliable seal at the connection points.
free delivery
Axminster Workshop Hose Adaptor - 50mm to 100mm
Axminster Workshop
304 Stainless Steel Pipe Fittings 4-Point Reducer to 6-Point Internal and External Water Pipe Fittings(G3/4 Internal*G1/2 External)
Tap Reseaters
free delivery
Sharplace NPT Adaptor Reducing Adaptor Replacement Stable Professional Hex Reducer Coupler Adapter, 0.25in Internal
. Reliable Performance Engineered for precision fitment, this adapter provides a secure connection that prevents leaks and maintains the integrity of your liquid storage or waste management systems
free delivery
1/8" 1/4" 3/8" 3/4" 1" 1-1/4” BSP Male Thread, 304 Stainless Steel Pipe Fitting Reducer Hex Nipple Connector DN8 - DN32 (Size : DN32 to DN20)
Easy installation allows fast and comfortable connection with no tool required, quick joint to make tap and hose connecting easily
free delivery
MagiDeal Reducing Adaptor NPT Adaptor Tube Fitting Sturdy Replacement Pipe Fitting Reducer Adapter Hex Reducer Coupler Adapter, 0.375in Internal
Sturdy Construction Made from stainless steel, this adapter offers exceptional durability and rustproof, ensuring long term performance in demanding environments
free delivery
FLCPJGV NPT Reducer Adapter Reducing Adaptor Replacement NPT Thread Professional Stainless Steel Stable Hex Reducer Coupler Adapter, 0.25in Internal
Enhanced Versatility By enabling syrup barrels to connect effectively with chemical industry fittings, this adapter expands the potential applications and usability of these containers
free delivery
AYTOSH 10pcs 304 Stainless Steel 2 Way Barbed Pipe Fitting Reducer Straight Connector Pagoda Joint Hose Barb, For Home Garden Hose Connectors Accessories (Size : 16mm - 20mm)
Hose connectors Material Made of solid 304 Stainless Steeel, resistance to corrosion and no rust, quality and durable material provides years of extended use
free delivery
25% discount
Axminster Workshop Hose Adaptor - 50mm to 100mm
Axminster Workshop
£ 2.28
rockible Reducing Adaptor NPT Reducer Adapter Stable NPT Thread Reducing Pipe Fittings Adapter Reducer Pipe Extension Connector, 0.375in Internal
Reliable Performance Engineered for precision fitment, this adapter provides a secure connection that prevents leaks and maintains the integrity of your liquid storage or waste management systems
free delivery
XLWLLNJ Heavy Duty NPT Reducer Adapter for Syrup Bucket Replacement, Professional Stainless Steel Hex Reducer Adapter, 0.375in Internal
Enhanced Versatility By enabling syrup barrels to connect effectively with chemical industry fittings, this adapter expands the potential applications and usability of these containers
free delivery
McAlpine 42mm-35mm Rubber Seal Reducer for Chrome Waste Fittings MCALPINE-R/SEAL-42X35
Manufacturers Code - R SEAL-42X35
free delivery
Gralara NPT Adaptor Reducer Pipe Extension Connector Spare Parts NPT Thread Sturdy Tube Fitting Hex Reducer Coupler Adapter, 0.25in Internal
Enhanced Versatility By enabling syrup barrels to connect effectively with chemical industry fittings, this adapter expands the potential applications and usability of these containers
free delivery
Kooples Hardware Letter Tidy 14 x 4 Inch – 355mm x 102mm – Powder Coat Black BK – Internal Door Letterbox Cover Plate
Quick Installation Easy to fit with basic tools and screws
JISADER Reducer Pipe Extension Connector NPT Adaptor Stable Reducing Coupling NPT Thread for Syrup Bucket Hex Reducer Coupler Adapter, 0.25in Internal
Enhanced Versatility By enabling syrup barrels to connect effectively with chemical industry fittings, this adapter expands the potential applications and usability of these containers
free delivery
F Fityle NPT Reducer Adapter Reducing Adaptor Tube Fitting Stable Reducing Coupling Spare Parts Reducer Pipe Extension Connector, 0.25in Internal
* Reliable Performance Engineered for precision fitment, this adapter provides a secure connection that prevents leaks and maintains the integrity of your liquid storage or waste management systems
free delivery
KESOTO Hex Reducer Coupler Adapter NPT Adaptor Reducing Adaptor Reducer Pipe Extension Connector, 0.375in Internal
Enhanced Versatility By enabling syrup barrels to connect effectively with chemical industry fittings, this adapter expands the potential applications and usability of these containers
free delivery
AIDNTBEO Thread Adapters, 50pcs Stainless Steel Thread Adapters M8 8MM External Thread to M6 6MM Internal Thread Reducer for Furniture Projects
Converter These threaded reducers convert M8 (M8X1.25) threaded holes to M6 (M6X1) threaded holes.
free delivery
LOVIVER Hex Reducer Coupler Adapter Reducer Pipe Extension Connector Spare Parts Replacement Professional Stainless Steel NPT Adaptor, 0.25in Internal
Industry Compatibility Specifically designed to bridge the gap between syrup barrels and chemical industry systems, this adapter ensures seamless integration and compatibility with existing setups
free delivery
38-25mm (1.5" to 1.0") ID 90 Degree Reducer Silicone Coupler Hose Car Elbow Black
38mm to 25mm (1.5" to 1.0") Internal Diameter Leg Length 150mm Total Length 300mm
free delivery
Solvent 32mm (36mm) x 21.5mm Overflow Pipe Reducer - Pack of 5
Overflow Pipe & Fittings
free delivery
CHARNWOOD 63/45RC Reducing Cone 63mm to 45mm (2-1/2" to 1-3/4")
Used for stepping down or up in hose size and used for connecting a hose line to machinery with a different sized outlet.
free delivery
Milageto Reducer Pipe Extension Connector NPT Reducer Adapter Spare Parts Sturdy for Syrup Bucket Replacement Reducing Adaptor, 0.375in Internal
Sturdy Construction Made from stainless steel, this adapter offers exceptional durability and rustproof, ensuring long term performance in demanding environments
free delivery
HGZLQKD Reducer Pipe Extension Connector Hex Reducer Coupler Adapter Stainless Steel NPT Thread Sturdy Replacement NPT Adaptor, 0.25in Internal
Easy Installation For quick and straightforward installation, minimizing downtime and maximizing efficiency in industrial operations
free delivery
IBC Reducer Adapter with S100x8 Internal Thread, Great for Water Tanks and Spout Ball Valves (1/2inch)
High Quality Materials Made of high quality materials, high quality manufacturing process, sturdy and , excellent service life.
free delivery
10% discount
sourcing map PVC DWV Reducing Coupling Schedule 40 Gray 32mm x 63mm Socket Gray
Tips For use where systems will not exceed 140 F. Not intended for pressure use.
£ 9.99
SPEEDFIT MDPE 20mm x 15mm Connector - UG601B
mdpe 20mm to 15mm copper adaptor
free delivery
S100x8 Coarse Internal Thread Reducer Reliable Connection Solution for Water Storage Applications (3/4inch)
and Long-lasting This adapter is made of materials and undergoes a sturdy manufacturing process, its durability and excellent service life.
free delivery
Healifty 2sets Stainless Steel Reducing Nut Female Reducing Nuts Threaded Fastener Conversion Insert Reducer Nut Internal and External Thread Nut Female Lock Nut 304 Stainless Steel 10pcs*2
Versatile use for thread changes and repairs, these inserts are suitable for a wide range of , including machinery and automotive repairs,self tapping slotted thread insert,threaded fastener reinforcement
free delivery
Colcolo Reducer Pipe Extension Connector Hex Reducer Coupler Adapter Stainless Steel Stable Professional Tube Fitting NPT Adaptor, 0.375in Internal
Reliable Performance Engineered for precision fitment, this adapter provides a secure connection that prevents leaks and maintains the integrity of your liquid storage or waste management systems
free delivery
4"/110MM Internal Blanking Bung/Cap REDUCING to 2"/56MM Rigid Solvent Pipe
Please Note This fitting has an outside diameter of 110mm, making it the same size as 110mm solvent weld pipe and will not fit internally. This blanking bung is for use with fittings that have an internal diameter of 110mm.
free delivery
Domus 150mm to 100mm Reducer Adapter for Round Pin
Depth 60mm
SOLUSTRE 2sets Stainless Steel Reducing Nut Inner Lock Nut Thread Adapter Reducer Outer Fastener Nut Long Nut Inserts Female Reducing Nuts Internal Thread Nut 304 Stainless Steel 10pcs*2
Sleek finish the smooth surface of these thread inserts provides an attractive and professional appearance while ensuring a secure fit,metal thread repair sleeve,inner lock nut
free delivery
160mm 6" Spigot to 110mm 4" Single Socket Level Invert Reducer Adapter Underground Drainage Soil Pipe Coupling
Underground Drainage Pipe Fittings Level Invert Reducer Coupling 160 x 110mm
free delivery
Generic NPT Adaptor Reducing Adaptor Sturdy for Syrup Bucket NPT Thread Reducing Coupling Reducer Pipe Extension Connector, 0.375in Internal
Industry Compatibility Specifically designed to bridge the gap between syrup barrels and chemical industry systems, this adapter ensures seamless integration and compatibility with existing setups
free delivery
Pisces 32mm x 25mm Inline Garden Pond Hose Reducer - Tubing Adapter for Easy Connection of Hosepipe
Ease of Installation - The reducers are simple to install onto pond hose and are ideal for corrugated types. Use double wire hose clips to secure the hose.
free delivery
15mm x 8mm Single Part Compression Reducer - Bag of 10
This listing is for a Pack of 10
free delivery
Generic Reducer Connector NPT Adaptor Hex Coupler Tube Fitting Replacement Stainless Steel, 0.25in Internal
Industry Compatibility Specifically designed to bridge the between syrup barrels and chemical industry systems, this adapter ensures seamless integration and compatibility with existing setups
free delivery
Strap On Boss Internal Reducer 32mm black by kalsi
Kalsi Plastics uk
free delivery
Baoblaze NPT Adaptor Reducer Pipe Extension Connector Reducing Pipe Fittings Adapter Professional Tube Fitting Sturdy Reducing Adaptor, 0.375in Internal
Sturdy Construction Made from stainless steel, this adapter offers exceptional durability and rustproof, ensuring long term performance in demanding environments
free delivery
Vortice 46415 Plastic Pipe Reducer/Adaptor 100mm - 80mm
100mm external (97mm internal) to 80mm external (77mm internal) reducer adaptor
free delivery
McAlpine DC2-BL 4"/110mm Drain Connector with Sealing Ring to fit Plastic Waste Pipe, Black
Drain reducer connector
perfk NPT Adaptor Reducer Pipe Extension Connector Tube Fitting Replacement Stainless Steel Reducing Coupling Reducing Adaptor, 0.25in Internal
Easy Installation For quick and straightforward installation, minimizing downtime and maximizing efficiency in industrial operations
free delivery
PP Plastic 1/2" 3/4" Female Thread Straight Connector 1/2" to 3/4" Internal Thread Reducer Coupling Adapters Plumbing Pipe Fittings(1I2 inch)
Featuring a round head code, these connectors provide a smooth and aesthetically pleasing finish for your plumbing projects.
free delivery
KONTONTY Irrigation Pressure Regulator 25 Psi Pressure Reducing Valve Thread Connector Suitable for Garden Farm Park
Rv water hose -inlet size (female hose thread). outlet size (male hose thread). it can be connected to an automatic timer, backflow preventer or filter if required.
free delivery
80mm (3 inch) x 1 metre - PVC Flexi Hose - White Universal Tumble Dryer - Cooker Hood - Extractor Fan - Air Conditioner Hose
Made in Europe by Europlast
free delivery
Reducing Straight Connector 19mm To 13mm, Hose Pipe Reducer Barbed to Hose Tails
The other side fits 19mm internal diameter pipe (21mm external diameter)
free delivery
Yctze 10Pcs Set of Thread Repair Sleeve Insert Nut - Screw Reducing Conversion Tool, Ideal for M10 M8 Self Tapping, Male to Female Reducer, Slotted Adapter, Internal Threaded
The repair nut is made of stainless steel material to ensure the durability and stability of the product.
free delivery
PATIKIL M10/M12 to M6/M8/M10 Reducing Screw, 6 Pack 30mm Long External Thread Adapter Reducer Convert Joint Hardware Double Male Thread Bolts
Specification Material Carbon Steel; Bigger External Thread M10 M12; Smaller External Thread M6 M8 M10; Thread Pitch 1mm; Height 30mm 1.18 inch; Inner Diameter 3.5mm 0.14 inch, 5mm 0.2 inch, 7mm 0.28 inch
Reducing Bush Connector PVC Metric Plumbing Fittings Pipe Tubing Connectors for Aquarium Fish Tank Pond Solvent Weld Plumbing (Reducing Connector, 32mm to 25mm)
Reducing Bush Used to reduce pipe diameter. The bush simply solvent welds directly onto each end of the pipe.
free delivery
1PC Brass Reducer M18 M22 Threaded External Internal Adapter for High-Pressure Washer Gun Hose Transition Joint(Color E)
1PC Brass Reducer M18 M22 Threaded External Internal Adapter For High-pressure Washer Gun Hose Transition Joint
GARDENA adapter: thread adapter for connecting internal thread (G 3/4 inch) to external thread (G 1 inch) for irrigation systems (5305-20)
Quick to install simply pair the thread with tap and original Gardena system
Reducer Red Brass blank 1 1 / 4 Inch (5 / 4-Inch Outer Thread x 1 Inch Internal Thread
Material after drinking water regulation 50930 6
Niceminiwall Woodworking Lathe Rotary Chuck Adapter Reducer Sleeve, External 33 * 3.5mm to Internal 18 * 1.5mm Adapter Reduction Sleeve
Thread Adapter for Wood Lathe Chuck This screw thread spindle adapter is designed to convert 33x5mm thread to 18x1.5mm thread, allowing you to use a different chuck with your wood lathe.
Internal To External Reducer Female To Male Adapter Brass Pipe Connectors For Various Plumbing Applications
Upgrade your plumbing with our brass adapter. Enjoy hassle and leaks for a smoother plumbing experience.
10% discount
10 Pcs Thread Reducer, M8 to M10 Length 12MM Male Female Reducing Nut Thread Insert Nut Thread Reducing Nuts Insert Thread Repair Sleeve Pipe Fitting Conversion Sleeve Reducer
Product Specifications Female Thread M8 x 1.25; Male Thread M10 x 1.5; Length Approx. 12mm 0.5in; Bottom Hole 9mm 0.4in; Slotting Small Slot
£ 4.99
Sanitop-Wingenroth 22168 9 Reducer for Plastic Odour Traps Siphon Adaptor, White, 1 1/2 x 1 1/4 Zoll
High-quality workmanship benefit from high-quality workmanship and a resulting long-lasting product
25mm > 13mm Plastic Hose Straight Fitting Reducer Pipe Reducing Adapter
75mm (3 Inch) Length With Barbs For Secure Fitment
free delivery
Mission Rubber MEC 3 End Cap Suitable for All Pipes with an Outside Diameter of 80mm to 90mm Flexible Band Seal Rubber Boot Reducer Adaptor Pipe Connector Joiner
Mission MEC 3 End Cap Suitable for all pipes with an outside diameter of 80mm to 90mm Flexible Rubber Boot
free delivery
Compression 15mm x 10mm Internal Reducer For Radiator Valves 15mm to 10m 2x PCS
Brand myhomeware
free delivery
McAlpine DC3-BL Drain Reducer Connector-4"/110mm x 2", Black
Size 4" 110mm x 2" Finned seal Spigot for internal connection to 4" 110mm cast iron, plastic or clay Ideal for low level connections Sealing ring to fit BS EN 1451 2000 and BS EN 1329-1-2000 plastic waste pipe Manufactured in polypropylene
free delivery
McAlpine DC2BL-OS Offset Drain Reducer Connector, Black
Sealing ring to fit BS EN 1451 2000 and BS EN 1329-1-2000 plastic waste pipe
Lathe Spindle Adapter Utensil External Thread Black Internal Thread Adaptor for Spindle, Reducer Tube Fittings
Accurate Operation Convenient design can ensure smooth installation and help you avoid incorrect operations.
free delivery
Robust Design IBC Reducer Adapter S100x8 Coarse Internal Thread for Applications (1/2inch)
High Quality Materials Made of high quality materials, high quality manufacturing process, sturdy and , excellent service life.
free delivery
304 stainless steel pipe fittings 4-point reducer to 6-point internal and external water pipe fittings(Outer Inner Outer - G1/2)
Tube Fitting Locknuts
free delivery
304 stainless steel pipe fittings 4-point reducer to 6-point internal and external water pipe fittings(Internal and external elbows-G3/4)
Tube Fitting Locknuts
free delivery
Pisces 25mm x 20mm Inline Garden Pond Hose Reducer - Tubing Adapter for Easy Connection of Hosepipe
Strong Materials - Made of strong plastic material, the reducing fitting adapter is made to last and is up to various tasks around the garden and home.
free delivery
Hortafix Pond Pipe corrugated pipe Reducing Joiner 1 1/4" 32mm to 3/4" 20mm
Fits pipe with internal Diameter 32mm 1 1 4" ( 29mm Internal)
free delivery
15mm x 10mm Single Part Compression Reducer - Bag of 10
This listing is for a Pack of 10
free delivery
CHARNWOOD 63/56RC Reducing Cone 63mm to 56mm (2-1/2" to 2-1/4")
Used for stepping down or up in hose size and used for connecting a hose line to machinery with a different sized outlet.
free delivery
Reducer Brass 3/4 Inch Male Thread x 1/2 () Inch Internal Thread
Material after drinking water regulation 50930-3
free delivery
PATIKIL M10 to M8 Reducing Screw, 5 Pack 30mm Long External Thread Adapter Reducer Convert Joint Hardware Double Male Thread Bolts
Specification Material Carbon Steel; Bigger External Thread M10; Smaller External Thread M8; Thread Pitch 1mm; Height 30mm 1.18 inch; Inner Diameter 5mm 0.2 inch
sourcing map 25mm x 20mm PVC Reducing Coupling Hub by Hub Pipe Fitting Adapter Connector 5pcs
Hub by hub solvent-welded connections
7% discount
4 Pieces Reducer Adapter, Brass Thread Adapter Hex Water Pipe Reducer Fittings 1/2 Female to 3/4 Male Adapter for Hose Connector
Practical Reducer Adapter Thread reducer comes in 2 sizes, so you can easily convert the 1 2 inch water pipe into 3 4inch. Suitable for garden water pipe, convenient and practical.
£ 7.49
38mm > 25mm (1 1/2" > 1") Pipe Corrugated Reducing Joiner PVC Barbed Straight Tube Adapter Hose Reducer Fitting Coupling Adapter
AP Automotive
12% discount
ERGAOBOY 5 Pcs 1/4" BSP Female to 3/8" BSP Male Brass Reducer Hex Bushing Threaded Pipe Fitting
Working Parameters 0-1 MPA and -50-120 C.
£ 8.49
H&C VENT Pack of 2 Universal Duct Reducer Connector │ Ventilation Pipe PVC Adaptor │ Plastic Transition Ø3.14’’-5.9’’/ Ø80-150mm Round Ducting & Flexible Hose │ Extractor Fan Tumble Dryer Conditioner
Size and technical data Easily adjust round ventilation pipe diameters with this Universal Multi-Stage Ducting Reducer for 80 100 120 125 150 mm 3.14 3.93 4.72 4.92 5.90 pipe systems. Performance - up to 900m3 h. Connection type male spigot, can be used as female spigot too. Simply cut the connector to the required size and connect your ducts effortlessly!
BFG Reducing Bush (1/2 inch Male Thread (Ø 20mm)) / (3/8 inch Female Thread (Ø 15mm)) - 6 Pieces Brass Reducing Bush with 1/2" External and 3/8" Internal Thread for Drinking Water
Compatibility the brass reducer with 1 2 inch external thread (outer diameter approx. 20 mm) and 3 8 inch internal thread (inner diameter approx. 15 mm) can only be used on pipes with 1 2 inch (approx. 20 mm) internal thread and pipes with 3 8 inch (approx. 15 mm) external thread.
TAILONZ PNEUMATIC 2PCS Brass Pipe Fitting, Reducer Adapter, Hex Nipple, 3/8-Inch Male Pipe x 1/2-Inch Male Pipe
Widely Used Used for connecting a variety of pipes such as gas, oil and water pipes as well as pneumatic tools.
GARDENA adapter: thread adapter for connecting internal thread (G 3/4 inch) to external thread (G 1 inch) for irrigation systems (5305-20)
Quick to install simply pair the thread with tap and original Gardena system
3/4 to 1/2 Inch Reducer Adapters, 6 Pcs G3/4 Male Thread to G1/2 Female Stainless Steel Thread Adapters, BSP Stainless Steel Hex Bushing Reducer Connector Adapter Fittings for Heating
Package Includes You will receive 6 pieces of 1 2" female to 3 4" male BSP thread Stainless steel hex bushing reducing reducer connector. The quantity meets the needs of daily use in different fields, suitable for air, water, gas, oil, fuel, etc.
GARDENA Brass Reducer: Brass connecting Piece to The Pipe Connection with a quick coupling, 26.5 mm (3/4 ") - AG / 21 mm (1/2") - IG (7270-20)
Simple Thread reduction The brass reducer has an internal and external threads ever
McAlpine DC2-BL 4"/110mm Drain Connector with Sealing Ring to fit Plastic Waste Pipe, Black
Drain reducer connector
free delivery
Hortafix Pond Pipe corrugated pipe Reducing Joiner 1" 25mm to 3/4" 20mm
Range of Types
free delivery
15mm x 10mm Compression 3 Piece Reducing Set - Pack of 2
Very descrete, fits inside the fitting
free delivery
Pisces 20mm x 15mm Inline Garden Pond Hose Reducer - Tubing Adapter for Easy Connection of Hosepipe
Ease of Installation - The reducers are simple to install onto pond hose and are ideal for corrugated types. Use double wire hose clips to secure to the hose.
free delivery
4 Pieces Reducer Adapter Brass Thread Adapter 1/2 Male Thread to 3/8 Female Thread Hex Hose Pipe Connector for Tap Barrel Tap Rainwater Tanks Garden Hose (3/8)
Package Contents 4 Pieces reducer bushing connector, size the diameter of the external thread is 1 2 inch (20mm), the diameter of the internal thread is 3 8 inch (15mm).
PATIKIL M10 to M6/M8 Reducing Screw, 6 Pack 30mm Long External Thread Adapter Reducer Convert Joint Hardware Double Male Thread Bolts
Specification Material Carbon Steel; Bigger External Thread M10; Smaller External Thread M6 M8; Thread Pitch 1mm; Height 30mm 1.18 inch; Inner Diameter 3.5mm 0.14 inch, 5mm 0.2 inch
Set of 10 Silver Reducer Rings to Modify Internal Diameters on Different Types of Saws (22-16)
Adjustment and Conversion Used for adjusting and converting alloy saw blades and other mounting holes to smaller sizes.
free delivery
1PC Brass Reducer M18 M22 Threaded External Internal Adapter for High-Pressure Washer Gun Hose Transition Joint(Color H)
1PC Brass Reducer M18 M22 Threaded External Internal Adapter For High-pressure Washer Gun Hose Transition Joint
Internal To External Reducer Female To Male Adapter Brass Pipe Connectors For Various Plumbing Applications
Upgrade your plumbing with our brass adapter. Enjoy hassle and leaks for a smoother plumbing experience.
Reducer Extension 3/4 Outside x 1 Inside Brass Blank
Material according to drinking water regulation 50930-6 Hot-pressed
sourcing map PVC Reducing Coupling 1-1/2 x 1/2 Increaser/Reducer Coupling Pipe Fittings Adapter DWV Duct Reducer for Sewer Plumbing Drain Pipe Water Supplies Build Garden
Size - Inside Diameter 1-1 2 x 1 2", Wall Thickness 5.13mm to 3.87mm, Socket Depth 1 35.58mm 1.4", Socket Depth 2 22.98mm 0.99", Height 73.54mm 2.9".
25mm > 13mm (1" > 1/2") Pipe Corrugated Reducing Joiner PVC Barbed Straight Tube Adapter Hose Reducer Fitting Coupling Adapter
AP Automotive
BFG Plumbing Fittings Water Pipe Reducing Adapter, BSP Fittings, 3/4" Female x 1/2" Male, Chrome-Plated Brass Plumbing Joints and Connections, 10 Bar, Max. Temp. 120°C, BSP Connector
FUNCTIONAL TOOL Use with the water main plumbing pipe, flexible pipe and central heating systems, also with washing machine water pipe or garden equipment. Standard plumbing tools should suffice.
McAlpine 42mm-35mm Rubber Seal Reducer for Chrome Waste Fittings MCALPINE-R/SEAL-42X35
Manufacturers Code - R SEAL-42X35
free delivery
PATIKIL M10 to M8 Fine Thread Adapter Reducer Thread Reducing Nuts Insert, 10 Pack 15mm Threaded Hollow Tube Adapter Brass Coupler Connector Pipe Fitting
NOTE Please confirm the thread size.
Sanitop-Wingenroth, malleable cast Iron Reducer Number 241, with Internal Thread, Silver, 13180 3
Galvanised
free delivery
102mm to 76mm (4.0" to 3.0") 45 Reducer Silicone Hose Coupler Intercooler Universal Tube Black
102mm to 76mm (4.0" to 3.0") Internal Diameter Leg Length 150mm Total Length 300mm
free delivery
tecuro Reducer Piece M15/1 Inner Thread x 3/8 Inch Male Thread Chrome-Plated
Includes 2 seals. Material chrome-plated brass.
BFG Reducing Bush (1 inch Male Thread (Ø 32mm)) / (1/2 inch Female Thread (Ø 20mm)) - 4 Pieces Brass Reducing Bush with 1" External and 1/2" Internal Thread for Drinking Water
Compatibility the brass reducer with 1 inch external thread (outer diameter approx. 32 mm) and 1 2 inch internal thread (inner diameter approx. 20 mm) can only be used on pipes with 1 inch (approx. 32 mm) internal thread and pipes with 1 2 inch (approx. 20 mm) external thread.
ERGAOBOY 5 Pcs 1/8" BSP Female to 1/4" BSP Male Brass Reducer Hex Bushing Threaded Pipe Fitting
Working Parameters 0-1 MPA and -50-120 C.
McAlpine T16 1.1/2in x 1.1/4in Inlet Reducer (600) T16 372T16
1 1 2 Inch x 1 1 4 Inch Trap Inlet Reducer
free delivery
Set of 10 Silver Reducer Rings to Modify Internal Diameters on Different Types of Saws (25.4-20)
Adjustment and Conversion Used for adjusting and converting alloy saw blades and other mounting holes to smaller sizes.
free delivery
63mm to 51mm (2.5" to 2.0") 90 Degree Silicone Reducer Hose Coupler Tube Set with Hose Clips Black
63mm to 51mm (2.5" to 2.0") Internal Diameter Leg Length 150mm Total Length 300mm 2 Hose Clips
free delivery
sourcing map Threaded Reducer, M10 to M5 Thread Convert Screw Adapter Pipe Fitting Connector External Male Thread Hardware Fastener Accessory, Pack of 15
The threaded reducer can convert the M5x0.8 thread to the M10x1.0 thread. It is a common light fixtures accessory for the repairing and restoring of ceiling lamps and chandeliers, or DIY making.
free delivery
Reducer Extension Outer x Internal Thread Brass Blank Plumbing Fitting
Material according to drinking water regulation 50930-6 Hot-pressed
free delivery
15mm to 10mm Internal Reducing Kit for NWT Towel Rail & Radiator Valves
Valves for towel rails & radiators
free delivery
sourcing map PVC Reducing Coupling 1 x 1/2" Increaser/Reducer Coupling Pipe Fittings Adapter DWV Duct Reducer for Sewer Plumbing Drain Pipe Water Supplies Build Garden
Size - Inside Diameter 1 x 1 2", Wall Thickness 4.66mm to 3.82mm, Socket Depth 1 32.71mm 1.3", Socket Depth 2 22.87mm 0.99", Height 62.07mm 2.4".
PATIKIL M10 to M5 Fine Thread Adapter Reducer Thread Reducing Nuts Insert, 10 Pack 12mm Threaded Hollow Tube Adapter Brass Coupler Connector Pipe Fitting
NOTE Please confirm the thread size.
PATIKIL M10 to M6 Reducing Screw, 5 Pack 20mm Long External Thread Adapter Reducer Convert Joint Hardware Double Male Thread Bolts
Specification Material Carbon Steel; Bigger External Thread M10; Smaller External Thread M6; Thread Pitch 1mm; Height 20mm 0.79 inch; Inner Diameter 3.5mm 0.14 inch
32mm to 19mm (1.3" to 0.8") 90 Reducer Silicone Hose Coupler Intercooler Universal Tube Black
32mm to 19mm (1.3" to 0.8") Internal Diameter Leg Length 150mm Total Length 300mm
free delivery
304 Stainless Steel Reducer Pipe clamp External Connection Internal Thread Joint Reducer Pipe Joint Water Heating AUOQKQUT(DN32-25)
free delivery
Tecuro Reducer External Thread 1 x Internal Thread 1/2 Brass Blank
Material after drinking water regulation 50930-3
free delivery
304 stainless steel pipe fittings 4-point internal wire diameter reducer to 6-point internal water pipe fittings(Elbow-G1/2)
Tube Fitting Locknuts
free delivery
PATIKIL M10 to M6/M8 Reducing Screw, 6 Pack 20mm Long External Thread Adapter Reducer Convert Joint Hardware Double Male Thread Bolts
Specification Material Carbon Steel; Bigger External Thread M10; Smaller External Thread M6 M8; Thread Pitch 1mm; Height 20mm 0.79 inch; Inner Diameter 3.5mm 0.14 inch, 5mm 0.2 inch
6" to 4" Internal Pipe Reducer to fit Inside 160mm Underground Drainage and Reduce Down to 110mm 4" Flexible Rubber Boot Reducer Adaptor Pipe Connector Joiner
Internal Pipe Reducer to fit inside 160mm Underground drainage and reduce down to 110mm
free delivery
304 stainless steel pipe fittings 4-point internal wire diameter reducer to 6-point internal water pipe fittings(Elbow-G1/2)
Tube Fitting Locknuts
free delivery
PATIKIL M10/M12 to M6/M8/M10 Reducing Screw, 6 Pack 20mm Long External Thread Adapter Reducer Convert Joint Hardware Double Male Thread Bolts
Specification Material Carbon Steel; Bigger External Thread M10 M12; Smaller External Thread M6 M8 M10; Thread Pitch 1mm; Height 20mm 0.79 inch; Inner Diameter 3.5mm 0.14 inch, 5mm 0.2 inch, 7mm 0.28 inch
Brass Reducer Pipe Connector with External and Internal Thread 1 1/4"- 1" - Warranty 10 Years - MONTERAL
COMPATIBILITY - Brass reducer pipe connector with 1 1 4" male thread and 1" female thread, suitable for connecting plumbing pipe copper pipe, brass pipe, steel pipes in water, heating and gas supply systems
free delivery
PATIKIL M14 to M12 Fine Thread Adapter Reducer Thread Reducing Nuts Insert, 5 Pack 10mm Threaded Hollow Tube Adapter Brass Coupler Connector Pipe Fitting
NOTE Please confirm the thread size.
304 Stainless Steel Reducer Pipe clamp External Connection Internal Thread Joint Reducer Pipe Joint Water Heating ZUZAOJUYIN(DN32-20)
free delivery
PATIKIL M10 to M8 Reducing Screw, 5 Pack 20mm Long External Thread Adapter Reducer Convert Joint Hardware Double Male Thread Bolts
Specification Material Carbon Steel; Bigger External Thread M10; Smaller External Thread M8; Thread Pitch 1mm; Height 20mm 0.79 inch; Inner Diameter 5mm 0.2 inch
PATIKIL M12 to M10 Reducing Screw, 5 Pack 20mm Long External Thread Adapter Reducer Convert Joint Hardware Double Male Thread Bolts
Specification Material Carbon Steel; Bigger External Thread M12; Smaller External Thread M10; Thread Pitch 1mm; Height 20mm 0.79 inch; Inner Diameter 7mm 0.28 inch
Reducer Extension Outer x Internal Thread Brass Blank
Material according to drinking water regulation 50930-6 Hot-pressed
PATIKIL M8x1mm to M6x1mm Thread Adapters Sleeve Reducing Nut, 10 Pack 10mm Screw Conversion Nut Threaded Tube Coupler Connector Pipe Fitting
NOTE Please confirm the thread size.
Reducer Red Piece Brass Blank 1/2 Inch Male Thread x 3/4 Inch Internal Thread
Material according to drinking water regulation 50930-6 hot-pressed.
free delivery
IDUTQUMW 304 stainless steel reducer pipe clamp external connection internal thread joint reducer pipe joint water heating(DN25-10)
free delivery
H&C VENT Duct Reducer │ Ducting Pipe Connector for Ventilation │ Air Vent Transition 100 to 125 mm / 4 to 5 inch Diameter │ Round PVC Hose Joint Adaptor │ Extractor Fan Exhaust Conditioner Air Con AC
H&C VENT
Pack of 4 Brass Reducer Adapters for Pipe Connection with Internal and External Threads
PREMIUM BRASS DESIGN Constructed from brass material, this adapter is built to last and can handle high-pressure situations without compromising its integrity.
free delivery
PATIKIL M12 to M10 Reducing Screw, 10 Pack 20mm Long External Thread Adapter Reducer Convert Joint Hardware Double Male Thread Bolts
Specification Material Carbon Steel; Bigger External Thread M12; Smaller External Thread M10; Thread Pitch 1mm; Height 20mm 0.79 inch; Inner Diameter 7mm 0.28 inch
free delivery
Reducer Red Plain Brass 1/4 Inch Internal Thread x 1/8 Inch External Thread
External thread, cylindrical (G) according to DIN ISO 228-1 standard, internal thread, cylindrical (Rp) according to standard ISO 7 1 DIN EN 10226-1 or DIN ISO 228-1
free delivery
BKGWCSOR 304 stainless steel welding size head, internal and external precision polishing reducer pipe joints, concentric reduce(SS316L,38mm-32mm)
free delivery
304 stainless steel pipe fittings 4-point reducer to 6-point internal and external water pipe fittings(Extended outer outer inner-G1/2)
Tube Fitting Locknuts
free delivery
304 stainless steel pipe fittings 4-point reducer to 6-point internal and external water pipe fittings(Extended outer outer inner-G1/2)
Tube Fitting Locknuts
free delivery
XSDSM Hexagonal Reducer Brass Reducing Fittings G3/4 Internal Thread to G3/4 External Thread for Pipe Connection Industry Trade Home,Brass,50MM
Application Field Widely applicable to pipeline connections, covering industrial pipeline systems, plumbing facilities in trade places, and waterway renovation and maintenance scenarios such as home kitchens and bathrooms.
free delivery
TNGNMGVSJ 304 stainless steel welding size head, internal and external precision polishing reducer pipe joints, concentric reduce(SS304,51mm-25mm)
free delivery
FURREN 304 stainless steel reducer pipe clamp external connection internal thread joint reducer pipe joint water heating 4 points(DN40-DN32)
free delivery
Bwintech Pack of 18 1/4 inch to 1/2 inch internal and external thread BSP thread brass hex nipple & hex reducer & hexagonal socket connector for converting pipe connections
Specification 1 4 inch to 1 2 inch internal and external thread BSP brass hex nipple & hex reducer & hex socket connection
free delivery
FURREN 304 stainless steel reducer pipe clamp external connection internal thread joint reducer pipe joint water heating 4 points(DN40-DN15)
free delivery
ANKROYU 2PCS Pressure Sprayer Reducer Adapter Internal Thread External Thread Sprayer Adapter
2PCS With 2pcs threaded reducer adapter connectors, one for use and one for spare, to keep the sprayer in use for a long time.
free delivery
Rubber Soil Waste Pipe Internal Reducer Waste Adaptor (SIRWA) (4)
Soil InternalReducer Waste Adaptor
free delivery
FURREN 304 stainless steel reducer pipe clamp external connection internal thread joint reducer pipe joint water heating 4 points(DN40-DN20)
free delivery
FURREN 304 stainless steel reducer pipe clamp external connection internal thread joint reducer pipe joint water heating 4 points(DN32-DN15)
free delivery
XSDSM Brass Reducer Tap Conversion Connector Adapter Reducer G1 Internal Thread to G1/2 External Thread Suitable for Pipe Conversion Connection
Material and Durability Reducer is cast with high-quality brass, with high strength and high pressure resistance, suitable for hot and cold water pipes and a variety of fluid media, and will not be easily deformed or leaked for a long time.
free delivery
FURREN 304 stainless steel reducer pipe clamp external connection internal thread joint reducer pipe joint water heating 4 points(DN40-DN25)
free delivery
Bwintech Pack of 18 3/8 inch to 1/2 inch internal and external thread BSP thread made of brass, hex nipple, hex reducer and hexagonal socket connector for converting pipe connections
Specification 3 8 inch to 1 2 inch internal and external thread BSP brass hex nipple & hex reducer & hex socket connection
free delivery
XSDSM G1/2 Internal Thread to G1/8 External Thread Tap Reducing Fittings Brass Connector Reducer for Pipe Conversion Connection
Purpose plumbing fittings is used for plumbing and heating pipe fittings, which can convert G1 2 internal threaded pipes into G1 8 external threaded connections, adapt to faucets, water pipes, etc., to solve the connection problems between different pipe diameters.
free delivery
XSDSM G1/2 Internal Thread to G1/2 External Thread Tap Adapter Brass Reducing Fittings Hexagonal Reducer Suitable for Pipe Conversion Connection,Brass,100MM
Functional purpose adapter can be used to connect faucets and water pipes, and can also solve the problem of interface mismatch in the pipeline system. It is a practical tool for the conversion and connection of pipelines in home and commercial plumbing engineering.
free delivery
Hose Connector Adapter European Standard Reducer 3/4 Inch to 1/2 Inch Internal Thread Plastic Garden Hose Connector Hose Adapter 5 (Color : Black)
Excluding nozzle
free delivery
FURREN 304 stainless steel reducer pipe clamp external connection internal thread joint reducer pipe joint water heating 4 points(DN32-DN25)
free delivery
XSDSM Threaded Brass Hexagonal Reducing Connector G1/8 Internal Thread * G1/8 External Thread Suitable for tap Pipe Joint Conversion
Reducer It is specially optimized for the pipeline system, achieving seamless connection between G1 8 internal thread and G1 8 external thread, meeting the diverse installation needs of home and commercial places.
free delivery
Thread Inserts Kit, Thread Reducer,304 Stainless Steel Internal and External Threaded Nuts, M8M10M12-M16, Thread Conversion, Thread Sleeve Screws, Thread sheath-M10*5 * 15 [6pcs] ( Size : M16*10*15 [6
Size External thread diameter*Internal thread diameter*length
free delivery
XSDSM Tap Brass Reducer G1 Internal Thread to G3/4 External Thread Adapter Octagonal Reducer for Pipe Conversion Connection
High-quality materials Reducer cast with high-density brass, it is strong and durable, oxidative and beautiful, suitable for hot and cold water pipes and various liquid media conveying.
free delivery
Bwindech 3 Quick Connectors 1/2" Stainless Steel Double Wire Swivel Hose Connectors Externally Threaded 3/8" Internal Thread Swivel Connectors Hex Reducers
Quick Installation It is recommended to wrap the raw material tape in the threaded port before connecting, and after screwing it, the corresponding threads can be used, without leakage problems.
free delivery
FURREN 304 stainless steel reducer pipe clamp external connection internal thread joint reducer pipe joint water heating 4 points(DN32-DN20)
free delivery
304 Stainless Steel Reducer Pipe clamp External Connection Internal Thread Joint Reducer Pipe Joint Water Heating(DN32-15)
304 stainless steel reducer pipe clamp external connection internal thread joint reducer pipe joint water heating(DN25-10)
XSDSM Tap Reducer Connector G1 Internal Thread * G1 External Thread Octagonal Brass Reducer for Pipe Conversion Connection
Octagonal anti-slip The octagonal edge structure provides a larger wrench force surface, which is anti-slip and torsional during installation, avoids the thread damage caused by tool slippage, and ensures a firmer tightness.
free delivery
304 Stainless Steel Reducer Pipe clamp External Connection Internal Thread Joint Reducer Pipe Joint Water Heating EKFBQBGW(DN25-10)
FURREN 304 stainless steel reducer pipe clamp external connection internal thread joint reducer pipe joint water heating 4 points(DN25-DN8)
free delivery
XSDSM Brass Reducer G3/8 Internal Thread to G1/4 External Thread Reducing Tap Connector Hexagonal Reducer for Pipe Conversion Joint
High-quality material plumbing fittings cast in brass, with both hardness and toughness, and is not easily eroded by water flow and air, ensuring a long service life.
free delivery
High Pressure Sprayer Reducer Adapter Premium Copper Proof G3/8 Internal to G1/4 External Thread Sprayer Connector for Household Irrigation 2PCS
CONVENIENT 2PCS PACK This set includes two adapters offering great value and convenience. Keep one as a spare to ensure uninterrupted use of your sprayer. The dual pack is for those who need reliable backups or multiple connections in different locations.
free delivery
FURREN 304 stainless steel reducer pipe clamp external connection internal thread joint reducer pipe joint water heating 4 points(DN25-DN10)
free delivery
XSDSM Brass Reducer Adapter G1/2 Internal Thread to G3/8 External Thread Tap Reducer Fittings for Pipe Conversion
Pipe diameter conversion Reducer is designed for 4-point to 3-point pipe diameter (G1 2-point to G3 8). Precision threads ensure that water is not leaking, making it the perfect solution for pipeline transformation. Whether it is new or repaired, it can be easily dealt with.
free delivery
Bwintech 6 pieces 1/8 inch to 1/4 inch internal and external thread BSP thread made of brass, hex nipple, hex reducer and hexagonal socket connector for converting pipe connections
Specification 1 8 inch to 1 4 inch internal and external thread BSP brass hex nipple & hex reducer & hex socket connection
free delivery
FURREN 304 stainless steel reducer pipe clamp external connection internal thread joint reducer pipe joint water heating 4 points(DN25-DN20)
free delivery
XSDSM Reducer Adapter G1/2 Internal Thread to G3/4 External Thread Brass Reducer Fittings for Pipe Conversion Connection
Reducer Overall height is 32mm, G1 2 internal thread port diameter is 20mm, G3 4 external thread end length is 14mm, and the diameter is 25mm, with clear specifications and suitable for a variety of pipeline installation needs.
free delivery
XINHUIPART Leak-proof pipe hose fittings 1/2" 3/4" BSP internal thread to 3/4" 1" adapter reducer thread Garden Irrigation Connection Internal and External Thread Nuts (Color : 3I4 inch to 1 inch)
Perfect for connecting threaded garden hoses, watering sewers, pressure washers, faucets, lawn sprinklers and nozzles
free delivery
FURREN 304 stainless steel reducer pipe clamp external connection internal thread joint reducer pipe joint water heating 4 points(DN25-DN15)
free delivery
Garden Hose Connection Accessories 1/2" 3/4" BSP Internal Thread to 3/4" 1" Adapter Reducer Thread Garden Irrigation Connection Internal and External Thread Nuts (Color : 1I2 inch to 1 inch)
Thread type BSP
free delivery
XSDSM Tap Brass Reducer G1/2 Internal Thread to G1/4 External Thread Reducing Connection Accessories Reducer for Pipe Conversion Connection
Installation operation First clean the pipe fitting interface and wrap the raw material tape around the thread. After aligning the position, use a wrench to tighten it clockwise and the installation will be completed in a few steps.
free delivery
Internal To External Reducer Female To Male Adapter Brass Pipe Connectors For Various Plumbing Applications
The included black rubber sealing gasket provides a secure and leak connection for various plumbing applications. Its high pressure and temperature resistance make it suitable for different plumbing needs.
free delivery
FURREN 304 stainless steel reducer pipe clamp external connection internal thread joint reducer pipe joint water heating 4 points(DN20-DN15)
free delivery
XSDSM Hexagonal Reducing Fittings Reducer G3/4 Internal Thread to G1/2 Internal Thread Tap Adapter for Pipe Connection
Material and technology Reducer is made of stainless steel, made of precision processing technology, with regular hexagonal shape, high thread accuracy, high strength and wear resistance, and can adapt to a variety of complex environments.
free delivery
Garden Hose Connector Accessories 1/2" 3/4" BSP Internal Thread to 3/4" 1" Adapter Reducer Thread Garden Irrigation Connection Internal and External Thread Nuts (Color : 1I2 inch to 3I4 inch)
Leak-proof, corrosion-resistant, and can withstand extreme weather, you can make safe and leak-free modifications to maximize your equipment utilization.
free delivery
XSDSM Reducer Connector G1/4 Internal Thread * G3/8 External Thread Hexagonal Brass Reducer for Pipe Conversion Connection
Material description plumbing fittings is made of all copper, which is strong and durable, not afraid of rust, can withstand 2.5 kg of pressure, and can be used for hot and cold water.
free delivery
Garden Hose Connection Accessories 1/2" 3/4" BSP Internal Thread to 3/4" 1" Adapter Reducer Thread Garden Irrigation Connection Internal and External Thread Nuts (Color : 1I2 inch to 3I4 inch)
Thread type BSP
free delivery
FURREN 304 stainless steel reducer pipe clamp external connection internal thread joint reducer pipe joint water heating 4 points(DN20-DN10)
free delivery
Pack of 2 Reducing Sleeve 1 Inch Internal Thread x 3/4 Inch Female Thread, Brass Reducer Female 1 Inch x Female Thread 3/4 Inch, Sanitary Fittings for Water Pipe, Drinking Water, Container, Sanitary
Package Includes You will receive 2 pieces brass reducing sleeve, 1 inch female thread x 3 4 inch female thread, please check the dimensions before purchase
free delivery
YUANGANG Stainless Steel Flue Liner Reducer Tubing Connectors Chimney Adaptor Stove Pipe Multi-Specification Chimney Internal Parts(Ø100mm/Ø70mm)
multifunctional Stainless Steel Stove Pipe Reducer is used to connect an appliance to either a chimney liner, stack or twin wall flue system. It can also be used to reline existing masonry chimneys.
free delivery
FURREN 304 stainless steel reducer pipe clamp external connection internal thread joint reducer pipe joint water heating 4 points(DN20-DN8)
free delivery
XSDSM Tap Reducer Stainless Steel Reducing Accessories G1 Internal Thread to G3/4 Internal Thread Hexagonal Adapter for Pipe Connection
Application fields It is widely used in the fields of household water use, commercial building plumbing and industrial pipelines, and is a key accessories for realizing pipe diameter connections and ensuring the normal operation of the system.
free delivery
Stainless Steel Reducer Joint External Thread to Internal Thread-2 inches * 1.5 inches
Quick installation, simple and smart, saves space;
2 x Reducing Sleeve 3/4 Inch Internal Thread x 1/2 Inch Female Thread, 3/4 Inch x Female Thread 1/2 Inch Brass Reducer, Sanitary Fittings for Water Pipe, Drinking Water, Container, Sanitary
Box contents you will receive 2 pieces brass reducing sleeve, 3 4 inch female thread x 1 2 inch female thread, please check the dimensions before purchase
free delivery
10 X Thread Adapter Internal And External Thread Nut Screw Set Thread Reducer-M6*1-M10*1.5-L14mm
* In order to facilitate installation and removal, there is a groove on the top of each thread reducer, which can be used with a flat-blade screwdriver.
free delivery
XSDSM Tap Adapter Stainless Steel Reducer G1/2 Internal Thread to G1/2 External Thread for Pipe Conversion Connection, 38.5MM
Hexagon The appearance of Thread fittings is a hexagonal design, providing a good focus point, making it easy to use wrench and other tools for rotation, easily install and disassemble, and improve construction efficiency.
free delivery
FURREN 304 stainless steel reducer pipe clamp external connection internal thread joint reducer pipe joint water heating 4 points(DN15-DN8)
free delivery
Zilimontt 2PCS Copper Reducer 6-point To 4-point Connector Reducing Conversion 1-inch Bushing To Thread Water Pipe Internal And External Thread Connector Size(G1/2 to G1)
Wide application Suitable for systems such as pipes and heating equipment, this brass adapter reducer 1 2 Male x 1 Female has a wide range of applications. It can be used in various settings to connect different pipe sizes.
free delivery
YUANGANG Stainless Steel Flue Liner Reducer Tubing Connectors Chimney Adaptor Stove Pipe Multi-Specification Chimney Internal Parts(Ø70mm/Ø50mm)
multifunctional Stainless Steel Stove Pipe Reducer is used to connect an appliance to either a chimney liner, stack or twin wall flue system. It can also be used to reline existing masonry chimneys.
free delivery
XSDSM Reducer 1/2 Internal Thread to 1/2 External Thread Stainless Steel Reducing Accessories Tap Adapter for Pipe Conversion Connection, 100MM
Reducer Made of 304 stainless steel, anti-rust, can be exposed to hot and cold water for a long time, suitable for humid environments, high strength and durable, surface polishing, beautiful and easy to clean.
free delivery
FURREN 304 stainless steel reducer pipe clamp external connection internal thread joint reducer pipe joint water heating 4 points(DN15-DN6)
free delivery
Hose Joint Connector Kit European Standard Reducer 3/4 Inch to 1/2 Inch Internal Thread Plastic Garden Hose Connector Hose Adapter 5 (Color : Black)
Excluding nozzle
Garden Hose Connector European Standard Reducer 3/4 Inch to 1/2 Inch Internal Thread Plastic Garden Hose Connector Hose Adapter 5 (Color : Black)
Excluding nozzle
XSDSM Tap Stainless Steel Thread Fittings Reducer G1 Internal Thread to G3/4 External Thread Hexagonal Reducing for Pipe Conversion Connection
High-quality material selection Reducer is made of stainless steel, which is durable and oxidative, can work stably in humid environments and extend service life.
free delivery
Industrial Courtyard Garden Hose Fittings European Standard Reducer 3/4 Inch to 1/2 Inch Internal Thread Plastic Garden Hose Connector Hose Adapter 5 (Color : Black)
Hose quick couplings are suitable for all garden hoses, watering devices, nozzles, sprinklers, nozzles, etc.
6 Pack Brass Reducer Adapter for 3/4 inch to 1/2 inch For Pipe Connection with Internal Thread Design
BRASS CONSTRUCTION Crafted from robust brass, this reducer ensures longevity and resistance to wear and tear, making it a reliable choice for various plumbing needs.
FURREN 304 stainless steel reducer pipe clamp external connection internal thread joint reducer pipe joint water heating 4 points(DN15-DN10)
free delivery
Spray Water Connection European Standard Reducer 3/4 Inch to 1/2 Inch Internal Thread Plastic Garden Hose Connector Hose Adapter 5 (Color : Black)
Wide range of uses pipe joints are very suitable for use with elevated garden beds, homes, farms, lawns, greenhouse gardening and agricultural irrigation applications.
Yuanpgky Baluue Pressure Regulator, 45 PSI 3/4 Hose Thread Drip Irrigation Pressure Reducer Valve, For Irrigation Farm, With Internal External Threads(30PSI)
Pressure Regulating Valve Make optimal water flow and prevent excessive pressure, protecting plants and irrigation with a 15-45PSI pressure range.
free delivery
XINHUI Garden Hose Tap Connector Garden 1/2 Internal Thread To 3/4 Internal Thread Conversion Reducer Joint Faucet Adapter Fitting Pipe Repair Part 1 (Color : 3I4 to 1I2)
Easy to Install,Smooth threads will reduce the resistance during installation, saving time and improving efficiency.
XSDSM Tap Thread Adapter Stainless Steel Reducer G3/4 Internal Thread to G1/2 External Thread Reducer for Pipe Conversion Connection
Hexagonal structure Reducer is hexagonal, conforming to the principles of mechanical engineering. With the help of wrench, it can accurately apply force, achieve rapid tightening and disassembly, and ensure stable connection.
free delivery
FURREN 304 stainless steel reducer pipe clamp external connection internal thread joint reducer pipe joint water heating 4 points(DN10-DN8)
free delivery
20MM Internal Thread to 25MM External Thread Straight Bushing 304 Reducing Straight Joint Water Pipe Joint Reducer
Stainless steel quick coupler, it is not easy to rust when used in humid environment for a long time.
XSDSM Reducer Stainless Steel Tap Adapter G3/8 Internal Thread to G1/2 External Thread Reducing Accessories for Pipe Connection
Dimensions Reducer total height 45mm, G3 8 internal thread end inner diameter 16mm, G1 2 external thread end outer diameter 20mm, adopts a compact design, which can flexibly adapt to various pipe installation environments, saving space.
free delivery
XLBH Easy to install 1/2" 3/4" Female Thread Straight Connector 1/2" to 3/4" Internal Thread Reducer Coupling Adapters Plumbing Pipe Fittings quality assurance (Color : 3I4 inch to 1I2 inch)
1 Pc x Female Thread Connector(size as you choose )
FURREN 304 stainless steel reducer pipe clamp external connection internal thread joint reducer pipe joint water heating 4 points(DN8-DN6)
free delivery
XSDSM Stainless Steel Reducer, Tap Adapter G1/2 Internal Thread to G3/4 External Thread Reducing Accessories for Pipe Connection
Multifunctional application Thread fittings is suitable for various scenarios such as home water pipes, irrigation systems, industrial pipelines, etc., especially suitable for the shrinkage connection needs of faucets, filters and other equipment.
free delivery
Household Hose Adapter Garden 1/2 Internal Thread to 3/4 Internal Thread Conversion Reducer Joint Faucet Adapter Fitting Pipe Repair Part 1 (Color : 3I4 to 1I2)
Quick couplings for water pipes are suitable for all types of garden hoses. Use quick coupling kits installed in sockets, hose ends and nozzles
Internal To External Reducer Female To Male Adapter Brass Pipe Connectors For Various Plumbing Applications
The included black rubber sealing gasket provides a secure and leak connection for various plumbing applications. Its high pressure and temperature resistance make it suitable for different plumbing needs.
Garden Hose Quick Connect Garden 1/2 Internal Thread to 3/4 Internal Thread Conversion Reducer Joint Faucet Adapter Fitting Pipe Repair Part 1 (Color : 3I4 to 1I2)
Bathroom plumbing repair joints
XSDSM Reducing Accessories Tap Adapter G3/4 Internal Thread to G3/4 External Thread Reducer for Pipe Conversion Connection
Easy to install The internal thread end is connected to the pipe, the external thread end is connected to the faucet, and use a movable wrench to jamm the hexagonal position to tighten it. It is recommended to wrap a few turns of raw material tape to prevent leakage. After installing, test whether it is leaky.
free delivery
Hose Repair Connector Extender Garden 1/2 Internal Thread to 3/4 Internal Thread Conversion Reducer Joint Faucet Adapter Fitting Pipe Repair Part 1 (Color : 3I4 to 1I2)
Reliable materials durable materials can be used for a long time.
Hose Connector Garden 1/2 Internal Thread to 3/4 Internal Thread Conversion Reducer Joint Faucet Adapter Fitting Pipe Repair Part 1 (Color : 3I4 to 1I2)
Bathroom plumbing repair joints
Quick Connect Garden Hose Garden 1/2 Internal Thread to 3/4 Internal Thread Conversion Reducer Joint Faucet Adapter Fitting Pipe Repair Part 1 (Color : 3I4 to 1I2)
The easy-to-connect connector for continuous water flow is an excellent tool for connecting garden accessories and water pipes. Easy to connect and disconnect.
XSDSM G1/2 Internal Thread to G1/2 External Thread Reducer Stainless Steel Reducer Tap Adapter for Pipe Conversion Connection, 70MM
Hexagon The appearance of Thread fittings is hexagonal, leaving sufficient focus points for wrench operation, making installation and disassembly easy to save effort.
free delivery
XSDSM 1" Internal Thread to 1/2 External Thread Tap Thread Accessories Reducer Hexagonal Reducing for Pipe Conversion Connection
Hexagonal Structure Reducer adapter is hexagonal, complies with the mechanical force application standards, can effectively conduct force when using a wrench, and easily achieve tightening and disassembly of pipe fittings.
free delivery
Hose Connector Adapter 1/2" 3/4" BSP Internal Thread to 3/4" 1" Adapter Reducer Thread Garden Irrigation Connection Internal and External Thread Nuts (Color : 1I2 inch to 3I4 inch)
Operation Use bare hands or tools to increase the length of the product, without leakage, and easy to install.
MDD 4 6 8 10 12 14 16 19mm Hose Barb Nagao Straight Reducing Reducer Adapters, For Transfer Brass Pipe Fitting (Size : 14mm To 8mm)
Hose connectors Material Made of solid brass, resistance to corrosion and no rust, quality and durable material provides years of extended use
Garden Hose Connector 1/2" 3/4" BSP Internal Thread to 3/4" 1" Adapter Reducer Thread Garden Irrigation Connection Internal and External Thread Nuts (Color : 1I2 inch to 3I4 inch)
Widely used in garden hoses, water pipe joints, faucets, water pressure washer, lawn sprinklers, faucets and other garden accessories
XSDSM Tap Reducer Stainless Steel Connecting G3/4 Internal Thread to G1 External Thread Adapter for Pipe Fitting Conversion Connection
Convenient installation Reducer adapter adopts a standard hexagonal interface design, and can be easily tightened with a wrench, saving time and effort, no professional tools required, suitable for DIY installation or repair.
free delivery
10 X Thread Adapter Internal And External Thread Nut Screw Set Thread Reducer-M5*0.8-M8*1-L10mm
* In order to facilitate installation and removal, there is a groove on the top of each thread reducer, which can be used with a flat-blade screwdriver.
XSDSM Brass Reducer Fittings Tap Adapter G3/4 Internal Thread to G1/8 External Thread Reducer for Pipe Connection Conversion
Structure The hexagonal design of plumbing fittings is easy to operate, and the internal and external threads are tightly adapted.
free delivery
Soytich Reducer 3/4' Internal Thread x 1/2' ' Ag Brass Thread Fitting (Thread01)
Brass Chrome-Plated.
free delivery
XSDSM Brass Reducer Reducing Tap Adapter G3/4 Internal Thread to G3/8 External Thread Reducer for Pipe Conversion Connection
Anti-slip appearance It has a hexagonal appearance, which is convenient for installation and operation with tools such as wrenches; the inner G3 4 thread matches the outer G3 8 thread, with fine threads, stable connection and good sealing.
free delivery
WORM SPEED REDUCER 28:1 REDUCTION RATIO MOTOR INTERNAL DRIVE ACCESSORIES WITH 28 TEETH WORM WHEEL 6MM BORE GEAR SHAFT FOR ROBOTICS DIY PROJECTS
EASY INSTALLATION Circular slot on one side and flat on the other for convenient installation and secure fixing.
free delivery
XSDSM Reducer Stainless Steel Reducing Fittings G1/2 Internal Thread to G1/2 External Thread Tap Adapter for Pipe Conversion Connection, 30MM
High-quality material Thread fittings is made of stainless steel, which has excellent durability, can withstand water and oxidation, has high mechanical strength, is not easy to deform or damage, and has a long service life.
free delivery
XSDSM Stainless Steel Reducer Accessories G1/2 Internal Thread to G1/2 External Thread Water Line Adapter for Pipe Conversion Connection, 50MM
Structural Design Reducer adopts a hexagonal design, providing a good focus for installation operation. With the help of wrench and other tools, it can be easily tightened or disassembled, improve construction efficiency and facilitate post-maintenance.
free delivery
XSDSM 1/2 Internal Thread to 1" External Thread Stainless Steel Reducing Coupling Tap Hexagonal Reducer Suitable for Pipe Connection
High-quality material Thread fittings is made of 304 stainless steel, with strong toughness and rust resistance, suitable for hot and cold water environments, ensuring stable and reliable long-term use.
free delivery
Brass reducer consists of brass, threaded connection, the reducer has internal or external thread, with rubber seal, reducer 1/2 to 4/6, total 2, suitable for drinking water.
Crack resistant and pressure resistant - Made of mature casting technology, the adapter reducer adopts a thickened structure, which is strong and durable, corrosion-resistant, rust-proof, explosion-proof and resistant to external pressure.
free delivery
Air Line Connectors, 1pc 1/8" 1/4" 3/8" 1/2" 3/4" 1" 1-1/4"1-1/2" Male× Female Internal and External Thread Reducer Bushing 304 Stainless Steel Reducer (Color : DN6 to DN10)
Features Rust-proof, corrosion-resistant, durable.
free delivery
XSDSM Stainless Steel Reducing Accessories Tap Reducer G1/4 Internal Thread to G1/2 External Thread Accessories for Pipe Conversion Connection
Construction Reducer adapter has a hexagonal shape, which is convenient for tool operation such as wrench, can effectively transmit torque, and achieve rapid installation and disassembly.
free delivery
XSDSM Reducing Accessories Tap Stainless Steel Adapter 1" Internal Thread to 1/2 Internal Thread Hexagonal Reducer for Pipe Connection, Industry, Trade, Home
Size The internal thread specification is G1" and has a diameter of 32mm, which can be connected to larger diameter pipes; the internal thread at the other end is G1 2, with an outer diameter of 20mm, which realizes the conversion of different pipe diameters, a height of 41mm and a weight of 117.5g.
free delivery
High Pressure Sprayer Reducer Adapter Premium Copper Proof G3/8 Internal Thread to G1/4 External Thread for Household Irrigation 2PCS
EASY INSTALLATION Designed for user convenience, this sprayer adapter features a straightforward installation process. The threaded pipe joints are precision-engineered to ensure a tight and secure fit, making it easy for anyone to set up and use.
free delivery
XSDSM Adapter Brass Reducer G3/4 Internal Thread to G1/2 External Thread Octagonal Reducing Fittings for Pipe Conversion Connection
Excellent material Reducer cast with high-quality brass, strong toughness and rust resistance, ensuring that it is not easy to deform or leak after long-term use, and is suitable for various water quality environments.
free delivery
XSDSM Brass Reducer Hexagonal G1/2 Internal Thread * G1/2 External Thread tap Reducing Connector for Pipe Connection Conversion
Appearance design presents a hexagonal appearance, conforms to engineering principles, is convenient for installation and disassembly with tools such as wrenches, and is convenient to operate.
free delivery
OSALADI 5 Sets Shower Connector Shower Flow Saver Limiter Shower Head Flow Restrictor Shower Flow Saver Adapter Shower Flow Saver Reducer Internal and External Teeth Water Head Abs
Shower Head Restrictor Shower head water limiters set is useful and excellent, high hardness, resistance.
free delivery
XSDSM Reducer Stainless Steel Adapter Threaded Fittings G1/2 Internal Thread to G3/8 External Thread Tap Reducer for Pipe Fitting Conversion Connection
Anti-slip design Reducer unique hexagonal edge structure, easy installation with ordinary wrench, the anti-slip texture ensures that there is no loss of hands during construction, and the installation is more worry-free.
free delivery
XSDSM G3/4 Internal Thread to G1/4 External Thread Tap Adapter Reducer Fittings Reducer for Pipe Conversion Connection
Reducer Adopt G3 4 (6 points) internal thread to G1 4 (2 points) external thread design to achieve accurate connection between large pipe diameter and small pipe diameter, and the thread accuracy meets the national standard requirements to ensure that the seal does not leak.
free delivery
Stainless Steel Reducer, Threaded Pipe Adapter, External Thread G1/2, Internal Thread G3/4
Easy and convenient installation, can be widely used in plumbing, hardware, gas etc.
Air Line Connectors, 1pc 1/8" 1/4" 3/8" 1/2" 3/4" 1" 1-1/4"1-1/2" Male× Female Internal and External Thread Reducer Bushing 304 Stainless Steel Reducer (Color : DN8 to DN6)
Features Rust-proof, corrosion-resistant, durable.
free delivery
XSDSM Brass tap Hexagonal Connector G1/4 Internal Thread * G1/4 External Thread Pipe Reducer Accessories for Pipe Conversion
Connection advantages adapter standard thread design, tight connection, effective prevention of water leakage.
free delivery
XSDSM Tap Brass Reducer G3/8 Internal Thread * G1/8 External Thread Reducing Connector Accessories for Pipe Fitting Conversion Connection
Converted purpose adapter is specially designed for faucet modification, water purifier pipeline, gas equipment, etc., to solve the connection problems of reduced diameter pipe fittings in bathrooms and HVAC systems.
free delivery
XSDSM Brass Reducer G3/8 Internal Thread * G3/8 External Thread Tap Adapter Hexagonal Reducing Thread Connector for Pipe Connection Conversion
Multifunctional conversion adaptation specially designed for pipe diameter reduction and connection conversion, achieving seamless connection between different equipment, especially suitable for old pipe renovation or installation of new devices, improving system compatibility.
free delivery
XSDSM G1/4 Internal Thread * G1/2 External Thread Brass Reducer Hexagonal Reducing Tap Connector for Pipe Conversion Connection
Dimensions Overall height 26mm, G1 4 internal thread end diameter 12.5mm, G1 2 external thread end diameter 20mm, thread part length 12mm, weight 38g.
free delivery
XSDSM Brass Reducer G1/8 Internal Thread * G1/4 External Thread Tap Adapter Fittings Hexagonal Reducer Thread Connector for Pipe Conversion Connection
Reducer The threaded interface at one end is G1 8, with a diameter of 9.5mm; the threaded interface at the other end is G1 4, with a diameter of 12.5mm, an overall height of 22mm, a threaded part length of 10mm, and a weight of 16g.
free delivery
XSDSM Threaded Brass Hexagonal Reducing Connector G1/4 Internal Thread * G1/8 External Thread Reducer Accessories Suitable for tap Pipe Joint Conversion
Selected Excellent Materials plumbing fittings are made of brass material, with a working temperature of -20 150 , with excellent durability (suitable for water gas oil media), without deformation for a long time, and durable.
free delivery
XSDSM Brass Thread Accessories Reducing Tap Connection Accessories G3/8 Internal Thread to G1/2 External Thread Reducer for Pipe Conversion Connection
Reducer Adopt standard G3 8 (3 points) internal thread and G1 2 (4 points) external thread specifications, designed to solve the needs of 3-pipe to 4-pipe connections to ensure accurate matching during pipeline conversion.
free delivery
XSDSM G3/4 Internal Thread * G3/4 External Thread Brass Octagonal Reducer Pipe Reducer Fittings for tap Pipe Conversion Connection
High-quality Material plumbing fittings is made of high-quality copper, which is strong and durable, high temperature resistant (-20 180 ), rust, explosion-proof and pressure-resistant.
free delivery
XSDSM G1/2 Internal Thread to G1/2 External Thread Octagonal Brass Reducer tap Reducing Connector for Pipe Connection Conversion
Pipe conversion function As a diameter reducer and faucet shrink connector, it can be used to convert pipe connections, which can play a role in connecting different pipeline systems or equipment, so that the water flow channel can be smoothly transitioned.
free delivery
10 Pieces Threaded Inserts, Reducer Nuts, Threaded Inserts, Stainless Steel Threaded Insert, Threaded Bolts with Internal Thread M8 X 1.25 and Male Thread M10 X 1.5
Stainless steel material The repair nut is made of high quality stainless steel material to ensure the durability and stability of the product, strong and durable, not easily deformed, and has excellent rust resistance.
free delivery
Adaptor / Reducer G1/2 Inch (1/2 Inch) Internal Thread to M22 External Thread for Connecting of Tap Attachment with M22 x 1 Internal Thread to Connection with 1/2 Inch Internal Thread
Made in Germany.
free delivery
Reducer Extension Outer x Internal Thread Brass Blank
Material according to drinking water regulation 50930-6 Hot-pressed
free delivery
H2O-Flex® Reducing Fitting 1/2 Inch Internal Thread (IG) to 3/8 Inch Male Thread (AG) Reducer Flat Sealing with Wide Sealing Surface Sleeve Nipple Thread Fitting Reducer Extension with Seal
Includes the seal
free delivery
Screw-in Nut, Reducing Nut with External Thread, Fasteners and Fixings, Pack of 10, M8 to M6 x 15 mm, Stainless Steel Threaded Insert, Internal Thread, Metric, Wood Rampam Sleeve, Thread Reducer
Durable and stable the reducing nut is made of high-quality materials with excellent durability and stability. The thread size is standard, the thread is clear and the restoration of the thread sliding thread is more accurate, which can improve the stability and reliability of the connection.
free delivery
Strap On Boss Internal Reducer 40mm black
Internal Reducer 40mm Black
free delivery
ARMYJY 30Pcs M8 To M6 Thread Reducer Internal Threaded Joint 8MM Male Rotate 10MM Female Stainless Steel Hardware Fasteners
Easy to Use The threaded insert is simple and convenient to use. It comes with 30 thread inserts, making it an effective tool for repairing thread faults or damaged internally threaded holes. With this threaded insert, you can repair them inexpensively and efficiently.
LT Easiyl 2 PCS BSP 1/2 Inch Stainless Steel Male Thread to Female Thread Plumbing Fittings Elbow Internal and External Reducers for Water Pipe Sanitary Connection
Size 1 2" BSP female x 1 2" BSP male. Max. working pressure 1,0 MPa (10 bar); Max. working temperature 95 C.
10pcs M6 to M10 Reducing Threaded Nuts - Internal M6 X 1.0, External M10 X 1.5, Length 12mm - Metal Reducer Nuts for Secure Connections
The repair nut is made of stainless steel material to ensure the durability and stability of the product
ZUDKSUY 10Pcs 1-Inch External Thread to 3/4-Inch Internal Thread PVC Reducer Bushing for PVC Pipe Fittings, Adapter for Swimming Pools Outdoor Applications Cold Water Supply Lines (1in - 0.75in)
Leak Prevention Design Uses Teflon tape on the ends to effectively prevent leaks, ensuring a reliable seal at the connection points.
Reducer / Reducing Nipple Short Version Male Thread M12 x 1 Internal Thread M10 x 1
Maximum operating pressure 0 - 35 bar, temperature range C -20 to +120
GPM DIANFLEX_8033408885476 Black NR Rubber Reducer 75mm Internal Diameter F 80mm, Multi-Coloured
Black NR rubber reducer 75mm internal diameter F 80mm
Thread Reducer Set Internal and External Thread Nut Screw Hardened Heat Treatment + Yellow Galvanized 10pcs (M6*1-M10*1.5-L14mm)
2PCS Sprayer Reducer Adapter G3/8 Internal Thread to G1/4 External Thread High Pressure Pesticide Sprayer Adapter Reducer Irrigation Sprayer Connector for Garden
STANDARD SIZE G3 8 internal threads to G1 4 external threads are conventional American size. It is suitable for most pipeline sizes. The packaging has 2PCS threaded accessories. Use the sprayer for a long time.
2PCS High Pressure Sprayer Reducer Adapter G3/8 Internal Thread to G1/4 External Thread Pesticide Sprayer Adapter
Widely used this adapter accessory can be used for the irrigation of households, bathrooms, washing machines, agriculture, village and industrial connection equipment and is widely used.
Reducer / Reducing Nipple Long Version Internal Thread G 1/4 Inch Male Thread G 1/8 Inch
Reducer Reducing Nipple Long Version Internal Thread G 1 4 Inch Male Thread G 1 8 Inch
Reducer / Reducing Nipple Long Version Male Thread G 1/4 Inch Internal Thread G 1/8 Inch
Reducer Reducing Nipple Long Version Male Thread G 1 4 Inch Internal Thread G 1 8 Inch
ANKROYU 1 Brass Water Pipe Hexagon Bushing Reducer Adapter with 1/2bspt External Thread and 3/4bspt Internal Thread for Industrial Household Pipes and Pipe Fittings
Durable Made of high quality brass material, the joint is durable and corrosion resistant to ensure lasting performance.
CHARNWOOD 100/63RC REDUCING Cone 100mm to 63mm
Reducing cone used to step down or up in hose size and used to for connecting to machinery with different sized outlets.
Fdit 2Pcs High Pressure Sprayer Reducer Adapter External Thread Internal Thread G1 4 G38 G3 8 Motorized G14 Connector Spraying Machine Set for Spray Machine Sprayers
Made Of Copper Material This sprayer reducer adapter is made of premium copper material, which is rust proof, durable, and has a long service life.
2PCS High Pressure Sprayer Reducer Adapter G3/8 Internal Thread to G1/4 External Thread Pesticide Sprayer Adapter Copper Irrigation Sprayer Connector Brass Pipe Fitting
Sturdy and Durable This sprayer reducer adapter is made of premium copper material, which is rust proof, durable, and has a long service life.
2Pcs High Pressure Sprayer,G3/8 Internal Thread to G1/4 External Thread Sprayer Adapter Irrigation Spray Adapter Reducer Adapter for Plants Watering
STURDY AND Made of premium copper material, rust-proof, , and long service life.
Verdant Touch Irrigation Sprayer Connector 2PCS High Pressure Sprayer Reducer Adapter G3/8 Internal Thread to G1/4 External Thread Pesticide Sprayer Adapter
Premium Copper Material Made of high-quality copper, this sprayer reducer adapter is rust-proof and durable, ensuring a long service life and reliable performance.
HONMEET 8 Pcs Shower Flow Connector Shower Head Water Saver Shower Head Water Restrictor Regulator Limiter Water Reducer Shut Off Valve Internal and External Teeth Copper Accessories
SHOWER HEAD WATER SAVING VALVE-- The kit contains different flow inserts to meet your requirements.
10 Thread Repair Inserts (internal Thread M4x0.7, External Thread M6x1.0) for Computerised Luminaire Mould Mechanical Equipment, Reducer Nuts with Internal and External Teeth
Wide Application Widely used in aviation, automobile, electronic communication, computer, mold, mechanical equipment and other manufacturing fields
Reducer / Reducing Nipple Plumbing Fittings Short Version Male Thread G 1/4 Inch Internal Thread G 1/8 Inch
Reducer Reducing Nipple Short Version Male Thread G 1 4 Inch Internal Thread G 1 8 Inch
![Thread Inserts Kit, Thread Reducer,304 Stainless Steel Internal and External Threaded Nuts, M8M10M12-M16, Thread Conversion, Thread Sleeve Screws, Thread sheath-M10*5 * 15 [6pcs] ( Size : M16*10*15 [6](https://cdn.netzshopping.de/productimages/C/J/9/B0CZM2P9JC.jpg)
